MN-500 connection problem with no broadcasting network Tags: Routers Connection Microsoft Networking Anonymous May 6, 2004 2:10:44 AM Archived from groups: microsoft.public.broadbandnet.hardware (More info?) Hi everybody, I am experiencing problems to connect an MN-500 adapter to a network without broadcasting. The access point is a Linksys with no broadcasting setting, I have set the SSID to the network name following the instruction of the manual but the adapter never recognizes the network. If broadcast is enable, the adapter works fine but when disable it never connects. Does somebody know some specific configuration or what to do to solve the problem? Thanks in advance for your help. More about : 500 connection problem broadcasting network Can't find your answer ? Ask ! Publish Related resources: ForumRESEND: Internet connection happens delayed with MN-500 ForumLoosing Connection between MN500 & MN520 Forumslow or no network with MN-500 Forumhooking a mn-500 to a network Forummn-500 and 710 adapter Forumcannot detect wirless base station mn-500 ForumProblem Connecting To Network Shares ( MN-500 ) ForumMN-500 detecting ForumMN-510 can't connect when SSID not broadcast ForumMN-500 in Europe? ForumMN-500 SSID Broadcasting ForumConnection problems with MN-500 ForumSSID Broadcast has to be enabled on router...? Forumproblem : wireless MN-500 connected, but not connected ForumMN-500 - Sharing Dial Up Internet Connection ForumWireless problem with MN-500 ForumMN-500 support and security problem ForumMN-500 , IPCONFIG 0.0.0.0, WIN2K Problem ? ForumMN-700 / MN-720 (Base Station - NIC drops connection ) ForumHow to setup a 1GB Gigabyte Network More resources Read discussions in other Networking categories Routers Gateways VPN LAN WAN Firewalls Cisco Netgear !