I don't have the room or money to build a sound studio yet. Furthermore, I
am working in a loft that has a big space opened to a bottom floor. In
order to resolve my recording issues I have found the above link in my quest
to accurately record voice, percussion, and acoustics on Pro Tools.
Have anyone tried these sound wedge-cut, and if you did are they a solution
for vocal and acoustic recording in an opened room? Or, are they just a
gimmick?
Looks like fun and likely effective to a degree (ceiling and floor would
have to be treated too), but some eggshell-type foam and blankets and
carpets all over the place (we have made a small booth) does a fine job.
Your words "A big space opened to a bottom floor..." is unclear what you're
describing.
If you have a hole into some kind of cavity, block it off, even with
blankets or bedsheets. What works well for larger applications is a
painter's drop sheet, large sizes available, different materials, fairly
reasonable, hardware store item. In Canada, try Canadian Tire.
Sounds like your goal is the traditional...to deaden/break up all surfaces
with soft and absorbent material so that sound does not reflect back.
"song writer" <iwritesongs@verizon.net> wrote in message
news:BDA14A46.A658%iwritesongs@verizon.net...
> http://www.musiciansfriend.com/srs [...] id/422620/ >
> I don't have the room or money to build a sound studio yet. Furthermore, I
> am working in a loft that has a big space opened to a bottom floor. In
> order to resolve my recording issues I have found the above link in my
quest
> to accurately record voice, percussion, and acoustics on Pro Tools.
>
>
> Have anyone tried these sound wedge-cut, and if you did are they a
solution
> for vocal and acoustic recording in an opened room? Or, are they just a
> gimmick?
>
> Thanks for your help.
>
On 10/24/04 1:31 PM, in article vFRed.18807$Pl.10535@pd7tw1no, "**bg**"
<info@thelittlecanadaheadphoneband.ca> wrote:
> Looks like fun and likely effective to a degree (ceiling and floor would
> have to be treated too), but some eggshell-type foam and blankets and
> carpets all over the place (we have made a small booth) does a fine job.
>
> Your words "A big space opened to a bottom floor..." is unclear what you're
> describing.
>
> If you have a hole into some kind of cavity, block it off, even with
> blankets or bedsheets. What works well for larger applications is a
> painter's drop sheet, large sizes available, different materials, fairly
> reasonable, hardware store item. In Canada, try Canadian Tire.
>
> Sounds like your goal is the traditional...to deaden/break up all surfaces
> with soft and absorbent material so that sound does not reflect back.
>
> Check out books on the topic at www.musicbooksplus.com >
> -rj-
Thanks RJ.
I have a loft that opens into the bottom floor of my home. It's going to be
a hassle trying to figure out a way to fix this problem. Your suggestion
sounds good. Thanks
If you're looking for low cost ways to treat a large space you can't go
wrong with rigid fiberglass. (Or any fiberglass, for that matter). For the
complete story see the Acoustics FAQ, second in the list on my Articles
page:
--
www.thelittlecanadaheadphoneband.ca www.lchb.ca "song writer" <iwritesongs@verizon.net> wrote in message
news:BDA14A46.A658%iwritesongs@verizon.net...
> http://www.musiciansfriend.com/srs [...] id/422620/ >
> I don't have the room or money to build a sound studio yet. Furthermore, I
> am working in a loft that has a big space opened to a bottom floor. In
> order to resolve my recording issues I have found the above link in my
quest
> to accurately record voice, percussion, and acoustics on Pro Tools.
>
>
> Have anyone tried these sound wedge-cut, and if you did are they a
solution
> for vocal and acoustic recording in an opened room? Or, are they just a
> gimmick?
>
> Thanks for your help.
>
Second posting - first did not show up on my server....
-----------------------------------------------------------------------
Looks like fun and likely effective to a degree (ceiling and floor would
have to be treated too), but some eggshell-type foam and blankets and
carpets all over the place (we have made a small booth) does a fine job.
Your words "A big space opened to a bottom floor..." is unclear what you're
describing.
If you have a hole into some kind of cavity, block it off, even with
blankets or bedsheets. What works well for larger applications is a
painter's drop sheet, large sizes available, different materials, fairly
reasonable, hardware store item. In Canada, try Canadian Tire.
Sounds like your goal is the traditional...to deaden/break up all surfaces
with soft and absorbent material so that sound does not reflect back.
--
www.thelittlecanadaheadphoneband.ca www.lchb.ca "song writer" <iwritesongs@verizon.net> wrote in message
news:BDA14A46.A658%iwritesongs@verizon.net...
> http://www.musiciansfriend.com/srs [...] id/422620/ >
> I don't have the room or money to build a sound studio yet. Furthermore, I
> am working in a loft that has a big space opened to a bottom floor. In
> order to resolve my recording issues I have found the above link in my
quest
> to accurately record voice, percussion, and acoustics on Pro Tools.
>
>
> Have anyone tried these sound wedge-cut, and if you did are they a
solution
> for vocal and acoustic recording in an opened room? Or, are they just a
> gimmick?
>
> Thanks for your help.
>
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.