Tom's Hardware > Forum > Audio > Pro Audio > FS - Tascam M3500 32x8 Mixer w/ Full Meter Bridge

FS - Tascam M3500 32x8 Mixer w/ Full Meter Bridge

Forum Audio : Pro Audio - FS - Tascam M3500 32x8 Mixer w/ Full Meter Bridge

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: rec.audio.pro (More info?)

 

32 mic/line inputs. Inline monitoring. 64 channels at mixdown. 4 band
EQ, sweep mids - shelf hi/lo w/ select freq. and an 80hz HPF. 6 aux
sends(1 & 3 and 2 & 4 are on switches. Full meter bridge, 32 inputs, 8
busses, 6 auxes and stereo.
Near mint condition. The paint around the mute buttons is wore. There is
a small tear on the arm rest and two knobs are missing. I have been
through EVERY signal path on this desk, and can find no faults. SMOOTH
FADERS!!! It does have the power supply(for some reason these things
have a disappearing PS problem? :-) ), but no stand.
I'm asking $1250.00 OBO. It goes on eBay next week if it's not gone. I
could take some pics if necessary.

mbenson@okcbackup.com

Also, I would prefer pickup, as this thing is pretty large. I will ship,
but you pay for the packing and shipping. My work has slowed down now,
so I could be talked into delivering it for the right amount of money.

Sponsored Links
Register or log in to remove.

Archived from groups: rec.audio.pro (More info?)

 

>Near mint condition. The paint around the mute buttons is wore. There is
>a small tear on the arm rest and two knobs are missing.

Uh...sure...near mint...right...


Ted Spencer, NYC

"No amount of classical training will ever teach you what's so cool about
"Tighten Up" by Archie Bell And The Drells" -author unknown

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

"Ted Spencer" <prestokid@aol.com> wrote in message
news:20041030013149.22420.00001611@mb-m06.aol.com...
> >Near mint condition. The paint around the mute buttons is wore. There is
>>a small tear on the arm rest and two knobs are missing.
>
> Uh...sure...near mint...right...
>
>
> Ted Spencer, NYC
>
> "No amount of classical training will ever teach you what's so cool about
> "Tighten Up" by Archie Bell And The Drells" -author unknown

I can send you pics if need be.....
BTW, do you still have your 3500? And did you ever swap back from those mods
you had done?

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

>BTW, do you still have your 3500? And did you ever swap back from those mods
>you had done?

I still have it, and no, all the mods are still in place and sounding great.
What made you think I might have swapped back?

BTW I was commenting on the "near mint" thing because IMHO yours was a classic
example of how the term gets so wildly misused. What the term "mint condition"
means is "absolutely brand new, perfect and unused, as in freshly minted
coins". "Near mint" suggests the most extremely insignificant of flaws; new
condition except for the tiniest of scuffs or dings somewhere that would be
hard to find even for someone who is looking for them.

Based on your description of your board, "fairly good condition for its age"
would be a lot closer to what I'd call the truth. "Near mint" is sheer
hyperbole. I wouldn't call my 14 year old M3500 that, and it has all the knobs,
all the paint around the buttons, and no tears in the armrest. It does have a
number of minor scuffs and scratches, but less than would be expected given its
age. I'd call its condition "excellent", age considered.

Forgive me if I'm being too hard on you over this - it just happens to be a pet
peeve of mine. It reminds me of a time when I went to look at a used car that
the owner swore was in "mint" condition; assuring me that it had no dents,
dings or significant scuffs or scratches. I asked her several times if she was
absolutely certain this was the case, explaining that I was only interested in
the car is it was. After her repeated assurances, I made the 45 minute drive to
see it. When I got there it took me about a second to spot body damage in
several places, some of it more than minor. I'd estimate that it would have
cost at least $1000 to make the repairs. I pointed out the damage, read her the
"mint condition" riot act and left within minutes of arriving.

It's too bad, beacuse when people have things to sell that really are in "near
mint" condition (like a Larrivee acoustic guitar I'm selling), describing them
as such just becomes meaningless.


Ted Spencer, NYC

"No amount of classical training will ever teach you what's so cool about
"Tighten Up" by Archie Bell And The Drells" -author unknown

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

"Ted Spencer" <prestokid@aol.com> wrote in message
news:20041030132421.08576.00003157@mb-m07.aol.com...
> >BTW, do you still have your 3500? And did you ever swap back from those
> >mods
>>you had done?
>
> I still have it, and no, all the mods are still in place and sounding
> great.
> What made you think I might have swapped back?
>
> BTW I was commenting on the "near mint" thing because IMHO yours was a
> classic
> example of how the term gets so wildly misused. What the term "mint
> condition"
> means is "absolutely brand new, perfect and unused, as in freshly minted
> coins". "Near mint" suggests the most extremely insignificant of flaws;
> new
> condition except for the tiniest of scuffs or dings somewhere that would
> be
> hard to find even for someone who is looking for them.
>
> Based on your description of your board, "fairly good condition for its
> age"
> would be a lot closer to what I'd call the truth. "Near mint" is sheer
> hyperbole. I wouldn't call my 14 year old M3500 that, and it has all the
> knobs,
> all the paint around the buttons, and no tears in the armrest. It does
> have a
> number of minor scuffs and scratches, but less than would be expected
> given its
> age. I'd call its condition "excellent", age considered.
>
> Forgive me if I'm being too hard on you over this - it just happens to be
> a pet
> peeve of mine. It reminds me of a time when I went to look at a used car
> that
> the owner swore was in "mint" condition; assuring me that it had no dents,
> dings or significant scuffs or scratches. I asked her several times if she
> was
> absolutely certain this was the case, explaining that I was only
> interested in
> the car is it was. After her repeated assurances, I made the 45 minute
> drive to
> see it. When I got there it took me about a second to spot body damage in
> several places, some of it more than minor. I'd estimate that it would
> have
> cost at least $1000 to make the repairs. I pointed out the damage, read
> her the
> "mint condition" riot act and left within minutes of arriving.
>
> It's too bad, beacuse when people have things to sell that really are in
> "near
> mint" condition (like a Larrivee acoustic guitar I'm selling), describing
> them
> as such just becomes meaningless.
>
>
> Ted Spencer, NYC
>
> "No amount of classical training will ever teach you what's so cool about
> "Tighten Up" by Archie Bell And The Drells" -author unknown

I remember reading somewhere after you had lived with the mods a while,
about them sounding a little sterile and kind of wanting the "Tascam" sound
back.

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

>I remember reading somewhere after you had lived with the mods a while,
>about them sounding a little sterile and kind of wanting the "Tascam" sound
>back.

I didn't like the sound of the video grade chips that Audio Upgrades used, so I
swapped them for high end Burr Brown opamps a few months later using the
sockets that Jim installed. I never wanted the original sound back though, just
something a bit warmer than Jim's chip choice.

I did do many projects on the stock console that I'm still proud of though. If
you know how to make the best of it it's a good sounding board. Much better
than the Mackie 8Buss IMO. The two keys to the 3500 are gain structure (always
run pretty hot into the stereo bus to keep noise down), and cutting upper mids
if you're boosting much HF shelving. The stock HF curve is too broad and low
and brings up a lot of nasty upper mids if you boost it much. Using the upper
mid eq (around 2-3K) to counteract that fixes it in most cases.


Ted Spencer, NYC

"No amount of classical training will ever teach you what's so cool about
"Tighten Up" by Archie Bell And The Drells" -author unknown

Reply to Anonymous
Tom's Hardware > Forum > Audio > Pro Audio > FS - Tascam M3500 32x8 Mixer w/ Full Meter Bridge
Go to:

There are 1212 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them