MN-730 bad connectivity to LinkSys router

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Since you are using a linksys router, I would assume your network doesn't
use 802.1x authenication at all.

In Windows XP SP1, a change was made to this authenication method such that
wireless connections that had this option enabled would have its connection
dropped after 3 minutes if the connection could not authenicate against
802.1x credentials.

To disable 802.1x authenication over your wireless network card...

1.. Click Start, point to Connect To, click Show all connections, and then
double-click your wireless network adapter.
2.. On the General tab, click Properties.
3.. Click the Wireless Networks tab.
4.. Under Preferred Networks, click your home network, and then click
Properties.
5.. Click Data encryption (WEP enabled).
6.. Click the Association tab, and then click to clear the Network
Authentication (Shared mode) check box and the The key is provided for me
automatically check box, if they are selected.
7.. Click the Authentication tab, and then click to clear the Enable IEEE
802.1x authentication for this network check box, if it is selected.
8.. Click OK two times to accept the changes.


Also make sure the linksys router has the most up to date firmware
installed.

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Erik" <anonymous@discussions.microsoft.com> wrote in message
news:add201c436ab$3c76e970$a601280a@phx.gbl...
> I've got an MN-730 PCI card in a very high-end machine,
> connected to a LinkSys wireless-B broadband router, and my
> connection drops at least once every 5 minutes, and
> somewhere along the line drops packets like crazy (no perf
> counters show this behavior however). I have four other
> computers in this net using various non-MS hardware and
> connected using ethernet cable or wireless; none has a
> similar problem. All machines are running XP with latest
> updates. The effects I see are:
>
> - Very slow or no response browsing web pages;
> - DNS resolution failures - failing to get a DNS response
> to a resolution request, when all other computers on the
> net can do so successfully;
> - Occasional complete failure to connect to the net even
> after minutes of waiting, e.g. when trying to sign in on
> MSN IM;
> - The broadband networking icon in my systray is orange
> and says 'no connection to internet' even while the
> broadband networking window says I'm connected
>
> Things I've tried to resolve this:
>
> 1. Reset entire network multiple times, including DSL
> modem and router;
> 2. Replaced MN-730 with a new one;
> 3. Updated all MS broadband software to latest (there are
> no MN-730 firmware upgrades at this time);
> 4. All machines at latest XP service pack level;
> 5. Uninstall-reinstall of the PCI card and its software;
> 6. Ensure that all other machines in the net can browse
> and work correctly during the sporadic failures of the MN-
> 730 machine.
>
> At this point I can't figure out what to do besides paying
> $100 for a new router that I don't want to have to buy.
>
> Any ideas? Is there something between the MN-730 and
> LinkSys routers? I saw one other gentleman's post about a
> LinkSys wireless-G router having similar problems. Does MS
> have any knowledge of interoperability problems between
> the MN-730 and LinkSys routers?
>
> Thanks!
>
> Erik
>
>
>

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Already did both of these. The LinkSys router's latest
firmware is from late 2002; I updated to this. I ensured
the authentication settings were off before the initial
post this morning (it has been off for the 3 weeks I've
been pursuing this problem). The post in fact took 3 tries
because of failures to resolve via DNS.

Erik



>-----Original Message-----
>Since you are using a linksys router, I would assume your
network doesn't
>use 802.1x authenication at all.
>
>In Windows XP SP1, a change was made to this
authenication method such that
>wireless connections that had this option enabled would
have its connection
>dropped after 3 minutes if the connection could not
authenicate against
>802.1x credentials.
>
>To disable 802.1x authenication over your wireless
network card...
>
> 1.. Click Start, point to Connect To, click Show all
connections, and then
>double-click your wireless network adapter.
> 2.. On the General tab, click Properties.
> 3.. Click the Wireless Networks tab.
> 4.. Under Preferred Networks, click your home network,
and then click
>Properties.
> 5.. Click Data encryption (WEP enabled).
> 6.. Click the Association tab, and then click to clear
the Network
>Authentication (Shared mode) check box and the The key is
provided for me
>automatically check box, if they are selected.
> 7.. Click the Authentication tab, and then click to
clear the Enable IEEE
>802.1x authentication for this network check box, if it
is selected.
> 8.. Click OK two times to accept the changes.
>
>
>Also make sure the linksys router has the most up to date
firmware
>installed.
>
>--
>Jason Tsang - Microsoft MVP
>
>Find out about the MS MVP Program -
>http://mvp.support.microsoft.com/default.aspx
>
>"Erik" <anonymous@discussions.microsoft.com> wrote in
message
>news:add201c436ab$3c76e970$a601280a@phx.gbl...
>> I've got an MN-730 PCI card in a very high-end machine,
>> connected to a LinkSys wireless-B broadband router, and
my
>> connection drops at least once every 5 minutes, and
>> somewhere along the line drops packets like crazy (no
perf
>> counters show this behavior however). I have four other
>> computers in this net using various non-MS hardware and
>> connected using ethernet cable or wireless; none has a
>> similar problem. All machines are running XP with latest
>> updates. The effects I see are:
>>
>> - Very slow or no response browsing web pages;
>> - DNS resolution failures - failing to get a DNS
response
>> to a resolution request, when all other computers on the
>> net can do so successfully;
>> - Occasional complete failure to connect to the net even
>> after minutes of waiting, e.g. when trying to sign in on
>> MSN IM;
>> - The broadband networking icon in my systray is orange
>> and says 'no connection to internet' even while the
>> broadband networking window says I'm connected
>>
>> Things I've tried to resolve this:
>>
>> 1. Reset entire network multiple times, including DSL
>> modem and router;
>> 2. Replaced MN-730 with a new one;
>> 3. Updated all MS broadband software to latest (there
are
>> no MN-730 firmware upgrades at this time);
>> 4. All machines at latest XP service pack level;
>> 5. Uninstall-reinstall of the PCI card and its software;
>> 6. Ensure that all other machines in the net can browse
>> and work correctly during the sporadic failures of the
MN-
>> 730 machine.
>>
>> At this point I can't figure out what to do besides
paying
>> $100 for a new router that I don't want to have to buy.
>>
>> Any ideas? Is there something between the MN-730 and
>> LinkSys routers? I saw one other gentleman's post about
a
>> LinkSys wireless-G router having similar problems. Does
MS
>> have any knowledge of interoperability problems between
>> the MN-730 and LinkSys routers?
>>
>> Thanks!
>>
>> Erik
>>
>>
>>
>
>
>.
>