HELP -- Monitoring in Digital Performer 4 using Builit-in ..

Archived from groups: rec.audio.pro (More info?)

>From: jasonpace1@yahoo.com (jep)
>Date: 11/17/04 2:10 AM Eastern Standard Time
>Message-id: <792a2f36.0411162310.77d5e69e@posting.google.com>
>
>hey folks,
>
>did most tracking with a motu 828, but we're doing a few odds and ends
>with the G4's soundcard.
>
>problem is -- we can't seem to monitor record-enabled tracks.
>
>have tried everything -- hardware settings are all set to built in.
>audio bundles are going to the stereo 1 and 2 built-in channels.
>audio patch through is selected.
>
>are we missing something? is the mac's card not full duplex? we can
>hear everything on playback, including newly added tracks through the
>sound card. and we can see all our levels. just can't hear while
>tracking.
>

I would think that being that the 828 is an all in one device for inputs that
it may want to send everything coming in it thru its outputs. I don't know
about the Mac card as I always use my MOTU 24i and card for sound and I use it
as a dedicated recording system. I have tryed the little speaker on the front
of the CPU just to see if it works but never even saw any need for it.