Tom's Hardware > Forum > CPU & Components > Other Components > Chieftec DX-01BD help

Chieftec DX-01BD help

Forum CPU & Components : Other Components - Chieftec DX-01BD help

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
SeaDooXP2000   12-18-2002 at 11:24:22 PM

any1 bought any of these cases or similar chieftec cases and figured out how there drive rails work...i can't get my lite-on 16x dvd to fit in, i think i may be putting them on wrong, could someone help me out or point me 2 an article?

Add a reply
Sponsored Links
Register or log in to remove.
Novakain   12-19-2002 at 04:04:17 AM
- 0 +

<A HREF="http://www.chieftec.com/products/Workcolor/ColorDX.htm" target="_new">http://www.chieftec.com/products/Workcolor/ColorDX.htm</A>

With generic drive rails, I've found that you need to make sure that you screw the rails into the right holes and that the rials are the correct way up

<P ID="edit"><FONT SIZE=-1><EM>Edited by novakain on 12/18/02 10:06 PM.</EM></FONT></P>

Reply to Novakain
4ryan6   12-19-2002 at 05:39:32 AM
- 0 +

My case didn't come with any instructions either, just had to figure it out, put the rail on the CD drive, metal clip towards the faceplate curving away from the CD drive, the end of metal clip should almost be lining up with the backside of the faceplate on the CD drive, the holes in the rail should be lined up with the screwholes on the CD drive, put the screws in but don't tighten them yet, just slighty snug them, then with one finger pull the rail toward the faceplate, tight against the screws, and tighten the screws with the other hand, repeat the process with the other side of the CD drive and slide the drive into its bay until it snaps into lock position, it should go right in, this is a really nice case, very high quality, let me know if this helps you out. Ryan




Details, Details, Its all in the Details, If you need help, Don't leave out the Details.

Reply to 4ryan6
SeaDooXP2000   12-20-2002 at 04:35:09 AM
- 0 +

I found out the problem guess my dvd-rom wasn' compatible with the case, so i took it back, other one installed easy thx for suggestions though.

Reply to SeaDooXP2000
Jake75   12-20-2002 at 09:32:39 AM
- 0 +

Aaah, I just love that case...I have a DX-01BD myself.
No problems installing the drives or anything.

<font color=blue>My sig, not yours</font color=blue>

Reply to Jake75
Ask the community Add a reply
Tom's Hardware > Forum > CPU & Components > Other Components > Chieftec DX-01BD help
Go to:

There are 1293 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.473 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them