Case fan

[hoserb2000]

I got a case (free) that only has 1 slot on the back just below the ps, the ps fan and one one the top (yes the top!) is there any way that I can add another slot for a fan?

You guys are the best!

 

[jihiggs]

if your handy with a dremel.

my computer is so fast, it completes an endless loop in less than 4 seconds!

 

[error_911]

Yeah, do like I do and start cutting away. I added a side panel window on my Nikao X-Jazz (http://www.tradexinfo.com/case/xjazz.htm) with a 120mm 104cfm/45db fan, and I modded the front panel (behind the door so that the intake fan can get air, and will be modding the front door on it too for the same purpose (whats the use of a Vantec 84cfm Tornado if it can't suck air?!)... also might be adding 60mm intake on bottom of case, below slots. All you need is a Dremel rotary tool and some cutoff wheels or cutting bit, or a jig-saw, or a lot of patience and a drill and metal file (i've done it all).

Ahhh! It's 2003 and wait, whats this!? My computer didn't blow up! ... Well damn, there goes my new Athlon @ 333FSB and my inssurance claim... heheheh

 

[lhgpoobaa]

You could try putting more powerful fans in or cutting a new hole or putting in a drive bay cooler or PCI slot cooler.

<b><i>The Very Hungry Caterpillar</i> - George W. Bush's favorite childhood book.
Note: This book was first published a year after Mr Bush graduated from College.</b>

 

[svol]

Here is a guide how to add additional holes inside your case: <A HREF="http://www.hardocp.com/article.html?art=MjA4" target="_new">http://www.hardocp.com/article.html?art=MjA4</A>.

My PC eats so much money that I'm in 'desperate' need of it to buy PC3500 RAM, help Svol with his OC project!
--- PM me for information.