Auto settings?

[yano]

just got some ocz pc2700 rev 3.2 mem
what should i set mem frequency and ddr reference voltage to? or leave settings to auto ?
Thank You

 

[Flipphone]

just leave it alone but if u want to tinker abit lower the cas .5 and see what happens.

 

[lhgpoobaa]

Thats pretty good ram. What Mhz are you running at.

You can leave it at auto if you wish, but you are probably missing out on performance.

I would at least try it on the most aggressive memory timings, double checking that it runs ok with the program MEMTEST86.

<b><i>The Very Hungry Caterpillar</i> - George W. Bush's favorite childhood book.
Note: This book was first published a year after Mr Bush graduated from College.</b>

 

[yano]

i just got a asus p4pe & p4 2.4
i know im probly not making the most out of this memory!

 

[lhgpoobaa]

well what do you have the memory speed set to in the bios? And is that a 2.4A or 2.4B cpu?

Ideally you want a high fsb:ram ratio like 3:4 and agressive memory timings to squeze performance out of that ram.



<b><i>The Very Hungry Caterpillar</i> - George W. Bush's favorite childhood book.
Note: This book was first published a year after Mr Bush graduated from College.</b>