Antec 430W Power Supply TRUE430

Subject: Can this motherboard handle these specs?
I'm thinking of buying this power supply - Antec 430W Power Supply TRUE430

My current specs for building the computer are:
ASUS P4PE/R/L/SATA Motherboard for Intel P4 478
Crucial DDR PC2700 512 MB • CL=2.5 • Unbuffered • Non-parity • 6ns • 2.5V • 64Meg x 64
Intel Pentium 4 2.4BGHz 512K 533MHz CPU Northwood P478
Maxtor 80GB 7200RPM Hard Drive Model 8 MB Cache
Creative Audigy 2 Platinum
ATI All-In-Wonder Radeon 8500DV


I'm going to do some video editing, (not much) gaming, sound editing, 3d graphics..

Is this a good start or do I need to look further?

Thank you,
bigOx

Looks good, powersupply will be plenty enough.
You might want to considder a faster videocard though if you want to do much gaming and 3D graphics.

My dual-PSU PC is so powerfull that the neighbourhood dimms when I turn it on

It should be fine with the TRUE series (as opposed to the LIE series, ie all my standard Antec 250W units start dropping the voltage around 160W and crap out around 180W).

<font color=blue>There are no stupid questions, only stupid people doling out faulty information based upon rumors, myths, and poor logic!</font color=blue>

Right, but I have a newer untrue PSU with the same problems.

<font color=blue>There are no stupid questions, only stupid people doling out faulty information based upon rumors, myths, and poor logic!</font color=blue>