Tom's Hardware > Forum > Storage > Hard Disks > installation problem with 3rd hard drive
Word :    Username :           
 

I have a problem with an installation of 3rd hard drive on my windows 2000 os. I would like to install 80 GB (8 MB Cache) Western Digital hard drive on my computer. After installaing windows 2000, I was able to detect 1st and 2nd hard drive; but 80 GB hard drive was not detected.

From Western Digital Support web site(http://support.wdc.com/download/index.asp), I have downloaded Data Lifeguard v10.0 and ran some tests. I was able to detect all my 3 hard drives when I ran the Data Lifeguard test; however, when I try to install the driver, I received an error message: I/O time out.

It seems like my hard drive is detected in BIOS; but not in OS 2000.

Any comment/advise?
Any information will be appreciated.

I am using ePox 4G4A+ motherboard.

Thank you.

<P ID="edit"><FONT SIZE=-1><EM>Edited by miscsyl on 02/24/03 12:10 PM.</EM></FONT></P>

Sponsored Links
Register or log in to remove.

You need to list your exact setup and how everything is connected,(IE;IDE?Primary?Secondary?Master?Slave?RAID?SCSI???).

Are your hardrive jumpers set right, for your configuration?


Details, Details, Its all in the Details, If you need help, Don't leave out the Details.

Reply to 4ryan6

If your hard drive is new, then you need to partition it first before any os can recognize it.

Reply to elzt

I had that same problem with my 80gb western digital hard drive. I have two in a raid 0 configuration, and when I added the 80 gig, it would sporadically disappear and reappear, for no apparent reason. I wound up having to reformat my computer due to a virus, and magically, the hard drive is always recognized by the OS (windowsxp). Very weird, I hope you get lucky and it works hehe, if you can't figure out the technical problem.

Reply to Codinerx

codinerx:

I think my situation is similar to yours. I had 3 hard disks in my computer. I did a clean installtion of windows 2000 OS - and after that, I can not see my 3rd hard drive (WD 80 GB) anymore.

When I installed windows 2000, I did a clean installation - which formatted the 1st hard drive - which has windows 2000 OS. Did you anything else on your computer that fixed the problem?

Thanks

Reply to miscsyl

I can't remember doing anything else that would have fixed the problem. I think I may have just gotten lucky, or perhaps downloading the windows updates may have fixed the problem? Its worth a shot, I hope you can figure it out.

O wait I just remembered something... In my bios, I had to change the boot order of a couple of thing to fix a different problem- I did that right before I reinstalled my new OS. I am not sure if that has had any effect whatsoever, but give it a try! Good luck!

<P ID="edit"><FONT SIZE=-1><EM>Edited by codinerx on 02/28/03 02:01 PM.</EM></FONT></P>

Reply to Codinerx
Tom's Hardware > Forum > Storage > Hard Disks > installation problem with 3rd hard drive
Go to:

There are 1113 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them