Tom's Hardware > Forum > Storage > Hard Disks > S.O.S!!! Problem ghosting SATA Raid Volume

S.O.S!!! Problem ghosting SATA Raid Volume

Forum Storage : Hard Disks - S.O.S!!! Problem ghosting SATA Raid Volume

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

I have the asus A7N9X Deluxe. It has the Silicone Graphics SATA RAID chip. I configured a RAID 0 Volume using 2 Seagate 60GB SATA Drives. The total volume size was about 113GB.(not 120 as you would think)

Problem: I used a Norton Ghost 6.0.x floppy. It had no problem seeing the two addional 40GB IDE drives I has installed prior to the SATA drives. It even saw the SATA volume. However, It mis -read the Volume size(something like 8GB). Obviousley, Norton Ghost was fooled into thinking that the SATA volume was too small to Ghost my exsisting OS and data over. I tried installing a 45GB partition thinking that maybe there is a Max Size that Norton can Ghost. This did not work either.

Any Suggestions?

Sponsored Links
Register or log in to remove.

<b><A HREF="http://www.powerquest.com/driveimage/didetails.cfm" target="_new"><font color=red>Drive Image</A></b></font color=red>

:smile: Good or Bad have no meaning at all, depends on what your point of view is.

Reply to khha4113

So , Norton ghost is no good for Sata and drive image works?

Reply to AfroGeek1
Tom's Hardware > Forum > Storage > Hard Disks > S.O.S!!! Problem ghosting SATA Raid Volume
Go to:

There are 836 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them