I've installed Reason 2.5 on a new 1.8 iMac G5 and, while the
installation appears successful, and all files are in their correct
places, the Refils all appear empty or I get a "bad format" message.
Propellorheads support and forums aren't sure on this one, so I thought
I'd aske around to see if anyone's had a similar thing happen to them.
Even the Factory Sound Bank and Orkestor Sound Banks are appearing to
be empty, despite being fully installed.
In article <1109733481.013608.45380@f14g2000cwb.googlegroups.com>,
"Noise" <sheernoise@hotmail.com> wrote:
> Hey all,
>
> I've installed Reason 2.5 on a new 1.8 iMac G5 and, while the
> installation appears successful, and all files are in their correct
> places, the Refils all appear empty or I get a "bad format" message.
> Propellorheads support and forums aren't sure on this one, so I thought
> I'd aske around to see if anyone's had a similar thing happen to them.
> Even the Factory Sound Bank and Orkestor Sound Banks are appearing to
> be empty, despite being fully installed.
>
> Thanks.
>
> Dave.
>
1.If you had a version of the Digidesign Bundled"Reason Adapted"on your
machine ahead of the installation of the full 2.5 version,these problems
can happen.
2.If so;check that the three digits after the "."at the end of the
Reason filenames are of the correct Reason(full version)filename
ending...
3.Trash the Peak preferences
4.Uninstall the "Reason Adapted" application,plug ins,and its
"Rewire"plug in.
5.Reinstall the 2.5 full version.
6.Repair disk permissions
7.Restart
8.Start your application!
In article <1109733481.013608.45380@f14g2000cwb.googlegroups.com>,
"Noise" <sheernoise@hotmail.com> wrote:
> Hey all,
>
> I've installed Reason 2.5 on a new 1.8 iMac G5 and, while the
> installation appears successful, and all files are in their correct
> places, the Refils all appear empty or I get a "bad format" message.
> Propellorheads support and forums aren't sure on this one, so I thought
> I'd aske around to see if anyone's had a similar thing happen to them.
> Even the Factory Sound Bank and Orkestor Sound Banks are appearing to
> be empty, despite being fully installed.
>
> Thanks.
>
> Dave.
>
1.If you had a version of the Digidesign Bundled"Reason Adapted"on your
machine ahead of the installation of the full 2.5 version,these problems
can happen.
2.If so;check that the three digits after the "."at the end of the
Reason filenames are of the correct Reason(full version)filename
ending...
3.Trash the Peak preferences
4.Uninstall the "Reason Adapted" application,plug ins,and its
"Rewire"plug in.
5.Reinstall the 2.5 full version.
6.Repair disk permissions
7.Restart
8.Start your application!
Regards
Frank
--
Pro Audio Link-Authorized Digidesign Pro Tools and Apple Dealer
Oslo-Norway
Phn:+47-22677075- +47-90073461-Fax:+47-22673535
e-mail:matrix@online.no ,frank@proaudiolink.no
www.proaudiolink.nowww.matrixproaudio.no
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.