Tom's Hardware > Forum > Audio > Pro Audio > Wavelab - Any tips for producing Acoustic guitar?

Wavelab - Any tips for producing Acoustic guitar?

Forum Audio : Pro Audio - Wavelab - Any tips for producing Acoustic guitar?

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: rec.audio.pro (More info?)

 

Hi there all of you -

I've got a dozen or so solo finger-picking guitar tracks I would like
to clean up and add some basic production to. The tracks were recorded
on two different wooden guitars and a dobro, in a variety of
surroundings with the mic - a cheap Sony stereo mic for a minidisc - in
different positions, sometimes placed inside the soundhole or attached
to the resonator grille, sometimes a foot away, sometimes three or four
foot away. Because of this, the tracks are not all of the same tonal
quality or volume.

I'll be using Wavelab 5.0 plus plug-ins to work on them. There are a
few pointers I could do with to help me out, since I'm a first-timer at
all this recording lark.

What simple Wavelab tools or step-by-step processes would you suggest
that will help with the following:

1. removing finger-pick noise - clicks and scratches?

2. removing static hum and high-pitch interference?

3. adding a fuller fatter sound to the recording overall, but
particularly to treble strings?

4. creating a wider 'surround' stereo sound for a single guitar,
particularly where the recording was made three or four feet away from
the mic?

5. making the overall sound more resonant and sustained?

6. Finally, is there a simple way to ensure that once they've gone onto
CD-R all of these tracks, despite the differences in their original
recordings, can come across at the same volume level?

Many thanks for your help with this - as I said, I'm a novice and a lot
of the terminology is lost on me - but I look forward to hearing from
you soon.
all the best
Chris

Sponsored Links
Register or log in to remove.
- 0 +

Archived from groups: rec.audio.pro (More info?)

 

On 11 Mar 2005 05:15:16 -0800, "CWK Joynes" <joyneschris@hotmail.com>
wrote:


>What simple Wavelab tools or step-by-step processes would you suggest
>that will help with the following:
>
>1. removing finger-pick noise - clicks and scratches?
These can be addressed one at a time with the gain change tool in the
process heading. Highlight and reduce, but check to be sure that the
noise doesn't also contain a significant bit of audio that will be
lost with it.

>2. removing static hum and high-pitch interference?
Trickier without the right plug-ins, but you could find an isolated
bit of noise and use the spectrum analyser to figure out what it is so
you can eq it out. This will again probably affect the whole mix so
be careful.
>3. adding a fuller fatter sound to the recording overall, but
>particularly to treble strings?
EQ
>4. creating a wider 'surround' stereo sound for a single guitar,
>particularly where the recording was made three or four feet away from
>the mic?
Stereo expander?
>5. making the overall sound more resonant and sustained?
Compression could help. Longer release time.
>6. Finally, is there a simple way to ensure that once they've gone onto
>CD-R all of these tracks, despite the differences in their original
>recordings, can come across at the same volume level?
Yes sit for hours and adjust them. This is a mastering job that should
probably go to someone who knows what they are doing, but if you have
no budget then you need to invest the time. If this is you playing
that's fine, if your charging someone this is a bad idea for both of
you.
>
What plug-in packages do you have?
Do you have Cubase or Nuendo on the same machine?

Reply to Paul

Archived from groups: rec.audio.pro (More info?)

 

Hi there and thanks for the response: it's much appreciated.

Just to let you know, this is all to be done by me on my laptop on a
zero-budget, and it's all my own stuff too so there's no issues about
time and cost.

I've got a fairly extensive plug-in package that covers the tools you
mention above - I don't have the name off-hand, but it's got about 70
or 80 plug-ins. I've got Cubase as well, but haven't used it much.

Reply to Anonymous
Tom's Hardware > Forum > Audio > Pro Audio > Wavelab - Any tips for producing Acoustic guitar?
Go to:

There are 1122 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them