Keep getting "network cable unplugged"

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Check the cable is plugged properly -- sometimes it does
not get fully inserted.

Also try connecting the cable to a different port on the
router, or with a different cable.

>-----Original Message-----
>But all my cables are ok. after about 5 minutes it
>reconnects and all is well for about 10 minutes and then
>I get the message again and my network disconnects with
>the same message again. Can anybody help?
>Thanks, John
>.
>

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

I had the same problem and have turned off QOS in the
TCP/IP configuration page for the the NIC.

Have been up for over an hour without a kick off!!

Regards

Ivan

>-----Original Message-----
>I had this problem; it appears that it was a problem
with the dongle on the
>laptop.
>The wireless connection is much smoother, but much
slower too.
>I've ordered a new ethernet card; hopefully this will
fix it.
>
>
><anonymous@discussions.microsoft.com> wrote in message
>news:152e401c445cd$672a63a0$a101280a@phx.gbl...
>> Check the cable is plugged properly -- sometimes it
does
>> not get fully inserted.
>>
>> Also try connecting the cable to a different port on
the
>> router, or with a different cable.
>>
>> >-----Original Message-----
>> >But all my cables are ok. after about 5 minutes it
>> >reconnects and all is well for about 10 minutes and
then
>> >I get the message again and my network disconnects
with
>> >the same message again. Can anybody help?
>> >Thanks, John
>> >.
>> >
>
>
>.
>