Looking for a mic arm & spin that is FLEXIBLE and does not..

Archived from groups: rec.audio.pro (More info?)

Canford Audio (UK) sell Anglepoise arms (spring-tensioned, as used in
adjustable reading lamps) but with a thread to take mic clamp hardware
bushes....
http://www.canford.co.uk/commerce/ [...] tid=96-334

"Anseo" <anseo@wanadoo.nl> wrote in message
news:4f16a015.0503310952.12168964@posting.google.com...
>A couple of years ago I was at a radio station were they had super
> flexible mic arms: you just grabbed the mic, moved it freely *any*
> desired position and there it stayed as you let go of the mic.
>
> Real easy, flexible and precise. Much better IMHO than the
> conventional mic stands I see everywhere in studios or at concerts. I
> find these rather clumsy for a difficult angle when recording
> acoustical instruments. As a matter of fact, I find several things on
> conventional mic stands & spins design not so clever. Also, some of
> them sag.
>
>
> My question: does anyone know how these "radio" mic arms are called,
> do they exist as boom stands for in the studio and does anyone know a
> spin that you can turn all directions (not just up and down)?
>
> Thanks.

Archived from groups: rec.audio.pro (More info?)

Oops, sorry -- Canford discontinued it! Doh!

"Anseo" <anseo@wanadoo.nl> wrote in message
news:4f16a015.0503310952.12168964@posting.google.com...
>A couple of years ago I was at a radio station were they had super
> flexible mic arms: you just grabbed the mic, moved it freely *any*
> desired position and there it stayed as you let go of the mic.
>
> Real easy, flexible and precise. Much better IMHO than the
> conventional mic stands I see everywhere in studios or at concerts. I
> find these rather clumsy for a difficult angle when recording
> acoustical instruments. As a matter of fact, I find several things on
> conventional mic stands & spins design not so clever. Also, some of
> them sag.
>
>
> My question: does anyone know how these "radio" mic arms are called,
> do they exist as boom stands for in the studio and does anyone know a
> spin that you can turn all directions (not just up and down)?
>
> Thanks.

Archived from groups: rec.audio.pro (More info?)

http://www.markertek.com

I believe they would have what you require.

--fletch


Anseo wrote:
> A couple of years ago I was at a radio station were they had super
> flexible mic arms: you just grabbed the mic, moved it freely *any*
> desired position and there it stayed as you let go of the mic.
>
> Real easy, flexible and precise. Much better IMHO than the
> conventional mic stands I see everywhere in studios or at concerts. I
> find these rather clumsy for a difficult angle when recording
> acoustical instruments. As a matter of fact, I find several things on
> conventional mic stands & spins design not so clever. Also, some of
> them sag.
>
>
> My question: does anyone know how these "radio" mic arms are called,
> do they exist as boom stands for in the studio and does anyone know a
> spin that you can turn all directions (not just up and down)?
>
> Thanks.

Archived from groups: rec.audio.pro (More info?)

Not exactly pro radio gear, but just FYI

You can make a mic holder using thick gauge copper wire.....I use mine for
navigating through the jungle of cymbal stands and resonating buckets that
is the drum set....this is great because you can custom make the "arm" to
suit your needs. Thicker wire for bigger mics/less movement, thinner for
smaller....long reach, short reach....to a attach a mic clip you can thread
the end of the copper and attach something that will hold a bolt that you
can screw a mic clip onto....or you can just do like I did and wrap the
copper around a bolt that will hold a mic clip, put a nut on the bolt to
clamp it strongly in place (threadlock makes it even stronger) and viola!
Attach the other end to a wall/ceiling/heavy object. I used a small bench
vise that is heavy enough to set on the floor, but can also clamp to cymbal
stands. If you want ultra heavy-duty for big LDC's and/or very little
movement, double up on the thick copper. Good luck!

--

Jonny Durango

"Patrick was a saint. I ain't."

http://www.jdurango.com



"Anseo" <anseo@wanadoo.nl> wrote in message
news:4f16a015.0503310952.12168964@posting.google.com...
> A couple of years ago I was at a radio station were they had super
> flexible mic arms: you just grabbed the mic, moved it freely *any*
> desired position and there it stayed as you let go of the mic.
>
> Real easy, flexible and precise. Much better IMHO than the
> conventional mic stands I see everywhere in studios or at concerts. I
> find these rather clumsy for a difficult angle when recording
> acoustical instruments. As a matter of fact, I find several things on
> conventional mic stands & spins design not so clever. Also, some of
> them sag.
>
>
> My question: does anyone know how these "radio" mic arms are called,
> do they exist as boom stands for in the studio and does anyone know a
> spin that you can turn all directions (not just up and down)?
>
> Thanks.