Archived from groups: alt.cellular.sprintpcs (
More info?)
"Oleg O." <un-jan05@sashos.com> wrote in message
news:dclps4$c8c$1@reader2.panix.com...
>
> In article <MAZEe.218$iM7.114@newssvr21.news.prodigy.com>,
> Frank Harris <frankbhX@XcompuserveX.com> wrote:
> >My wife's Sanyo 8100 is as you described. It only has 8 or 9
> >single-digit speedials (2-9 or 2-0). This is diffrent from most
> >Samsungs in which the phonebook slot number = the speedial number (1, 2
> >or 3 digits).
> >
> >Though the Sanyo system has only 8 or 9 speedials (which is all that
> >many people can remember anyway), you can assign speedials to more than
> >one number from a phonebook slot. For example, you can have your
> >spouse's work and cell numbers in one phonebook entry and each can be
> >assigned to a single-digit speedial. With a Samsung, you have to make
> >separate phonebook slots for the work and cell numbers so that they can
> >be separate speedials.
>
> Actually with 8200 you don't need to assign different numbers of the
> same entry to different speeddials -- you can access all numbers through
> one speeddial. Prese *and release* the speeddial number, and as your
> programmed entry is displayed, you can use left and right arrows to
> cycle through all the different numbers in that entry.
>
> So if you program mobile numbers of your most common callees to
> speeddials, pressing <number> <right arrow> TALK will call their home
> numbers.
>
> What I don't understand is why they don't have speeddials on buttons
> 0 and 1 (there are plenty of other buttons they could've used for
> voicemail instead of 1, and 0 is practically unused).
1 is set to call your voice mail. O is used to call the operator ...
Bob