Geil PC3500 Dual Channel memory ?????

[RIDER_1K]

Is this good memory for overclocking P4 2.4C (800) ??????

 

[Prof133]

<A HREF="http://www.pcstats.com/articleview.cfm?articleid=1368&page=1" target="_new">GeIL PC3500 DDR433 Dual Channel Memory Kit Review</A>:

<i>For our Intel rig, we used a Pentium4 1.6A, Abit's IT7 MAX2 Rev2 (yes I know it's not a DC DDR motherboard) and enabled the 3/4 memory divider. With both DIMM's installed in the Intel system I began to raise the FSB while maintaining the most aggressive memory timings. First 200MHz, 205MHz, then 210MHz memory frequency with no problems. At 219 MHz we had to increase the DIMM voltage to 2.8V to stabilize things. In the end with a voltage of 3V we were able to hit a maximum speed of 226 MHz with the tightest timings and 234 MHz at SPD!</i>

This is the only review that I could find. If you reached 234MHz FSB with 2.4C then that would put you at 234MHz x 12 = 2.808GHz. Difficult to tell what the memory can do until it is used in your particular setup.