Tom's Hardware > Forum > Audio > Pro Audio > Beyer M160
Word :    Username :           
 

Archived from groups: rec.audio.pro (More info?)

 

Beyer Dynamic M160, what is it worth? Better said, how much would you
pay for one?

Sponsored Links
Register or log in to remove.

Archived from groups: rec.audio.pro (More info?)

 

they go for 400 new so 300 used in top condition?

Euros ex vat...

JP



"Luxey" <lluxey1@eunet.yu> a écrit dans le message de
news:9fgp619c0fc01hdgjsjm3726c44fiumi9b@4ax.com...
> Beyer Dynamic M160, what is it worth? Better said, how much would you
> pay for one?

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

Luxey wrote:

> Beyer Dynamic M160, what is it worth? Better said, how much would you
> pay for one?

Would depend on the condition of the mic; they are somewhat fragile, and
the ribbons get tired. Reribboning is not inexpensive. I like those mics
a lot. I've had my pair so long I have no idea what the go for now.

--
ha

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

how much for a working a good looking second hand, in original green
wooden tiney box. Tuchel connector. No guaranties except personal
confirmation everything's fine at the moment.

If i get offer in the range of above mentioned, I'll sell it.

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

I just bought a mint M500N for 26 Euros with original box and papers... what
can I say...

Figure out a price based on the current street price times 0.75.

JP

"Luxey" <lluxey1@eunet.yu> a écrit dans le message de
news:0q0s615c636vioof85mt4lhp2jbl653b1v@4ax.com...
> how much for a working a good looking second hand, in original green
> wooden tiney box. Tuchel connector. No guaranties except personal
> confirmation everything's fine at the moment.
>
> If i get offer in the range of above mentioned, I'll sell it.
>
>

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

"JP Gerard" <jpgerard@skynet.be> wrote in message
news:426e32c2$0$30463$ba620e4c@news.skynet.be...
> I just bought a mint M500N for 26 Euros with original box and papers...
what
> can I say...


Good for you. Now with this saving you can relax about the RNCs.

Predrag

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

What is the mic's history... what has it been used for, or where did
you get it? Does it have a cable that will connect to the Tuchel
connector?

Al

On Tue, 26 Apr 2005 11:03:37 +0200, Luxey <lluxey1@eunet.yu> wrote:

>how much for a working a good looking second hand, in original green
>wooden tiney box. Tuchel connector. No guaranties except personal
>confirmation everything's fine at the moment.
>
>If i get offer in the range of above mentioned, I'll sell it.
>

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

LOL

Yes, I guess I could.

JP

"Predrag Trpkov" <predrag.trpkovNeSpamu@ri.htnet.hr> a écrit dans le message
de news:d4mi3t$2u5$1@ss405.t-com.hr...
>
> "JP Gerard" <jpgerard@skynet.be> wrote in message
> news:426e32c2$0$30463$ba620e4c@news.skynet.be...
> > I just bought a mint M500N for 26 Euros with original box and papers...
> what
> > can I say...
>
>
> Good for you. Now with this saving you can relax about the RNCs.
>
> Predrag
>
>

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

On Tue, 26 Apr 2005 14:22:35 +0200, "JP Gerard" <jpgerard@skynet.be>
wrote:

>I just bought a mint M500N for 26 Euros with original box and papers... what
>can I say...
>
>Figure out a price based on the current street price times 0.75.

Are you offering EUR150?

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

I've never ever seen a 160 going for 200 Euros new.

150 for a used one in pefect working order would be a bit of bargain.

JP

"Luxey" <lluxey1@eunet.yu> a écrit dans le message de
news:i0j171p650l5puistu1krv2643pl8t3bp7@4ax.com...
> On Tue, 26 Apr 2005 14:22:35 +0200, "JP Gerard" <jpgerard@skynet.be>
> wrote:
>
> >I just bought a mint M500N for 26 Euros with original box and papers...
what
> >can I say...
> >
> >Figure out a price based on the current street price times 0.75.
>
> Are you offering EUR150?

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

And no, I'm not offering 150 Euros, especially since I can't test the thing
before buying.

My local Beyer rep doesn't know what "re-ribonning" is, they just replace
the whole motor.
Basically, they slide a new mic in your mic body.
It is of course a very expensive repair...

With Funky Junk Italy selling the 160 for 400 Euros or so, having a 160
repaired in Belgium is not really cost effective.

So I would advise anyone thinking about buying a used 160 to try the mic vs.
a properly working 160 before giving away the money...

But you were asking for a price range..

I'd say 200 if just OK, 300 if mint... Euros ex VAT... but I'm known to
suggest/propose vastly inflated second hand prices ;O)

Realy, anywhere in that range would be fair, depending on condition.

JP

"Luxey" <lluxey1@eunet.yu> a écrit dans le message de
news:i0j171p650l5puistu1krv2643pl8t3bp7@4ax.com...
> On Tue, 26 Apr 2005 14:22:35 +0200, "JP Gerard" <jpgerard@skynet.be>
> wrote:
>
> >I just bought a mint M500N for 26 Euros with original box and papers...
what
> >can I say...
> >
> >Figure out a price based on the current street price times 0.75.
>
> Are you offering EUR150?

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

JP Gerard <jpgerard@skynet.be> wrote:
>the whole motor.
>Basically, they slide a new mic in your mic body.
>It is of course a very expensive repair...

If you get this done, PLEASE ask for the old parts back! There is a real
demand for the 160 transformers out there, among people who want to upgrade
the 260.80.
--scott


--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

Heh, never thought about that.

Now, let's see... yes, the transformer is swapped as well.

Not many go for it of course, and I'm not sure they would give the parts
back.

To be honest, I've done one of those already because I'm cheaper than the
local Beyer service center.
I'll ask if the owner still has the internal assembly.

JP

"Scott Dorsey" <kludge@panix.com> a écrit dans le message de
news:d4qp6r$3cs$1@panix2.panix.com...
> JP Gerard <jpgerard@skynet.be> wrote:
> >the whole motor.
> >Basically, they slide a new mic in your mic body.
> >It is of course a very expensive repair...
>
> If you get this done, PLEASE ask for the old parts back! There is a real
> demand for the 160 transformers out there, among people who want to
upgrade
> the 260.80.
> --scott
>
>
> --
> "C'est un Nagra. C'est suisse, et tres, tres precis."

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

JP Gerard <jpgerard@skynet.be> wrote:
>Heh, never thought about that.
>
>Now, let's see... yes, the transformer is swapped as well.
>
>Not many go for it of course, and I'm not sure they would give the parts
>back.

In the US, they have to do so by law. The only company I have ever dealt
with that has refused to do so is Countryman.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

On Thu, 28 Apr 2005 16:20:12 +0200, "Predrag Trpkov"
<predrag.trpkovNeSpamu@ri.htnet.hr> wrote:

>Pity! The sale was nearly closed.
>
>Perhaps if you had focused a bit more on the unhappy childhood...

Mine?

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

"Luxey" <lluxey1@eunet.yu> wrote in message
news:r5ge7194ql46l0s71bn5jgsa3smu7v8bq4@4ax.com...
> On Thu, 28 Apr 2005 16:20:12 +0200, "Predrag Trpkov"
> <predrag.trpkovNeSpamu@ri.htnet.hr> wrote:
>
> >Pity! The sale was nearly closed.
> >
> >Perhaps if you had focused a bit more on the unhappy childhood...
>
> Mine?


Might be the ticket.

On second thought, better not. Yours is probably too similar to mine.

Predrag

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

>
>On second thought, better not. Yours is probably too similar to mine.

;-)

Reply to Anonymous
Tom's Hardware > Forum > Audio > Pro Audio > Beyer M160
Go to:

There are 1143 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them