My Behringer BCA2000 played well four a couple of weeks. Recently the
audio playback stopped a few times. After installing the recent version
2 drivers the playback stops after 5 seconds.
The control panel gives this error code: 80000002-U:C0020000-T:1-D:0
All software is updated (SP2), cables checked (using USB2) PC specs are
well over minimum requirements. Both Foobar 2000 and Winamp 5.09
produce the same error. No indication of a USB2 failure.
"Parsifal" <ed99jansen@yahoo.com> wrote in message
news:1116685507.259906.129470@g47g2000cwa.googlegroups.com...
> My Behringer BCA2000 played well four a couple of weeks. Recently the
> audio playback stopped a few times. After installing the recent version
> 2 drivers the playback stops after 5 seconds.
>
> The control panel gives this error code: 80000002-U:C0020000-T:1-D:0
> All software is updated (SP2), cables checked (using USB2) PC specs are
> well over minimum requirements. Both Foobar 2000 and Winamp 5.09
> produce the same error. No indication of a USB2 failure.
>
> Any help would be appreciated.
> Thanks
>
Hi Parsifal. Sorry to hear about the trouble. I am running 2.0 and it
seems to like both my laptop and my desktop systems. So I am optimistic
that we can pinpoint the root cause of your performance issue with some
offline troubleshooting. I will have a technician contact you immediately
to get some detailed system and DAW information from you through this email
address. If you want to contact me directly, please use my contact
information below.
Best Regards,
Jim Savery
Global Customer Support Manager
BEHRINGER The Americas
BEHRINGER USA, Inc
Tel: +01-425-672-0816 x 111
Direct Dial: +01-425-939-3216
Fax: +01-425-673-7647
IP Phone Ext: 5024
mailto:j.savery@behringer.com
http://www.behringer.com
Problem solved running the 2.0.0.4 (beta) version of the drivers and
system trouble shooting. Excellent tech support from Behringer.
Jim Savery wrote:
> "Parsifal" <ed99jansen@yahoo.com> wrote in message
> news:1116685507.259906.129470@g47g2000cwa.googlegroups.com...
> > My Behringer BCA2000 played well four a couple of weeks. Recently the
> > audio playback stopped a few times. After installing the recent version
> > 2 drivers the playback stops after 5 seconds.
> >
> > The control panel gives this error code: 80000002-U:C0020000-T:1-D:0
> > All software is updated (SP2), cables checked (using USB2) PC specs are
> > well over minimum requirements. Both Foobar 2000 and Winamp 5.09
> > produce the same error. No indication of a USB2 failure.
> >
> > Any help would be appreciated.
> > Thanks
> >
>
> Hi Parsifal. Sorry to hear about the trouble. I am running 2.0 and it
> seems to like both my laptop and my desktop systems. So I am optimistic
> that we can pinpoint the root cause of your performance issue with some
> offline troubleshooting. I will have a technician contact you immediately
> to get some detailed system and DAW information from you through this email
> address. If you want to contact me directly, please use my contact
> information below.
>
>
> Best Regards,
>
>
> Jim Savery
> Global Customer Support Manager
> BEHRINGER The Americas
> BEHRINGER USA, Inc
> Tel: +01-425-672-0816 x 111
> Direct Dial: +01-425-939-3216
> Fax: +01-425-673-7647
> IP Phone Ext: 5024
> mailto:j.savery@behringer.com
> http://www.behringer.com
I BOUGHT THE BCA2000 B-CONTROL LIKE 2 DAYS AGO.. BUT WITH NO SOFTWARE SO I WHENT TO
BEHRINGER.COM AND DOWNLOADED THE SOFTWARE BUT I HAVE TROUBLEHOOTING IT I RUN IT
AND DID WHAT IT ASK ME TOO DO AND INSTALL ALL THE HARDWARE BUT NOTHING WOULD SHOW UP AFTER
I DID WHAT IT ASK ME TOO DO !!
CAN YOU HELP ME ?
PLEASE CONTACT ME @
theyoungstunnas@yahoo.com
Message edited by theyoungstunnas on 03-02-2009 at 09:30:39 PM
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.