Tom's Hardware > Forum > Audio > Pro Audio > 1/4" Transfer

1/4" Transfer

Forum Audio : Pro Audio - 1/4" Transfer

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: rec.audio.pro (More info?)

 

Did anybody here hang onto the ability to transfer a 1/4" two-track tape
with DBX Type II?

Sponsored Links
Register or log in to remove.

Archived from groups: rec.audio.pro (More info?)

 

mcp6453 <mcp6453@earthlink.net> wrote:
>Did anybody here hang onto the ability to transfer a 1/4" two-track tape
>with DBX Type II?

Steve Puntolillo does.

I might, but it's been years since I turned on the Type II box, and it
would probably need a serious going-over beforehand.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

Scott Dorsey wrote:
> mcp6453 <mcp6453@earthlink.net> wrote:
>
>>Did anybody here hang onto the ability to transfer a 1/4" two-track tape
>>with DBX Type II?
>
>
> Steve Puntolillo does.
>
> I might, but it's been years since I turned on the Type II box, and it
> would probably need a serious going-over beforehand.

Got any contact info for Steve? It's not a big project, but it would be
nice to get a transfer done.

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

You can contact Steve via his web site....

www.sonicraft.com

Regards:
Eric
www.webermusic.com


> > Steve Puntolillo does.
> >
> > I might, but it's been years since I turned on the Type II box, and it
> > would probably need a serious going-over beforehand.
>
> Got any contact info for Steve? It's not a big project, but it would be
> nice to get a transfer done.
>
>

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

You could also try Richard Hess....

www.richardhess.com

He lists both flavors of dbx...

Regards:
Eric
www.webermusic.com

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

On 31 May 2005 10:59:02 -0400, kludge@panix.com (Scott Dorsey) wrote:

>mcp6453 <mcp6453@earthlink.net> wrote:
>>Did anybody here hang onto the ability to transfer a 1/4" two-track tape
>>with DBX Type II?
>
>Steve Puntolillo does.
>
>I might, but it's been years since I turned on the Type II box, and it
>would probably need a serious going-over beforehand.
>--scott

Most all of my type II was of the 200 series, pretty much fixed
compression/expansion settings 2:1-1:2.
Except for the 228 which did allow for a bit of fiddling with
compression with that short slider.
I really liked my 224 unit the most for basic recording.
I did have a 118 unit(but then most everybody had one at one time or
another.) but it was very limited in what it could do before you
started getting that "swish and boom" from pushing the
compression/expansion to far.
If actually getting your hands on one of the DBX units is what you're
after that's not too dificult.
I see them in most of the old school hifi shops all the time. Wilson's
audio in my locale carries tons of DBX gear, both type I and II.
I've even picked up type II boxes in my local thrift shops from time
to time.(last 224 I bought for a friend came from Goodwill for a mere
7 bucks and scoped out factory perfect.)

Reply to None
Tom's Hardware > Forum > Audio > Pro Audio > 1/4" Transfer
Go to:

There are 808 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them