I currently have an 80GB WD SE hard drive. Im thinking about buying the 160GB 8mb cache maxtor drive to add to this. Will I have any issues with two different brands set up like this? Thanks to all that reply.
it should work just fine...nothing to worry about...make sure you set the jumpers correctly and you will be fine...
3 386DX-25's...12 volts...glue and some ln2 and a wicked amount of overclocking and you get a willamantee minus 36 pins, 33.75 million transistors and a couple hundred mhz...
As long as your board supports hard drives that large, it won't be a problem.
<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.