Corsair best settings?

[Masticore]

Hi!

Ich habe 2 3200er CL2 Corsair Speicherriegel, allerdings ohne LL Zusatz.
Im Bios sind die Einstellungen für den Speicher auf folgende Werte gesetzt:

Memory Frequency 100%
Resulting Frequency 166MHz

SDRAM Active Precharge Delay 7
SDRAM RAS to CAS Delay 3
SDRAM RAS Precharge Delay 3
SDRAM CAS Latency 2T

Mein System läuft mit 166MHz FSB, daher will ich diese Einstellung nicht verändern, aber kann ich mit den anderen Einstellungen meinen Arbeitsspeicher etwas tunen, um die optimale Leistung aus den Riegeln zu erhalten?

Danke im Voraus!

Gruß,
Masticore!

 

[pIII_Man]

what language is that....hmmm...from the numbers leme guess...

sounds like you are running low latency

Speicherriegel- is that springdale in dutch or w/e?

anyhow...if you have any of the pat enabled boards...go by the spd...thats just about the best you can get stably...

However if you are running an athlon xp with 166mhz bus then you can really lower your timmings if you have corsair LL stuff...you could take those to 6-2-2-2

Anyhow i hope i could help i don't speak whatever you speak...

BTW how is my german/dutch?

3 386DX-25's...12 volts...glue some ln2 and a wicked amount of overclocking and you get a willamantee minus 36 pins, 33.75 million transistors and a couple hundred mhz...

 

[Flinx]

PIII - Looks German to me. Goes something like this:

I have 2 3200 CL2 Corsair memory modules without LL.
In the Bios the memory settings are:

Memory Frequency 100%
Resulting Frequency 166MHz

SDRAM Active Precharge Delay 7
SDRAM RAS to CAS Delay 3
SDRAM RAS Precharge Delay 3
SDRAM CAS Latency 2T


My system runs with 166Mzh FSB, so I don't want to change these/that setting(s). However, can I, with other settings, tune my processor/system somewhat to achive optimum performance.


Thanking you in advance for your time and trouble.

The loving are the daring!<P ID="edit"><FONT SIZE=-1><EM>Edited by Flinx on 08/02/03 06:06 PM.</EM></FONT></P>

 

[Flinx]

Freund/Kamerad/Friend wird viel leichter gehen hier :
<A HREF="http://www.tomshardware.de/cgi-bin/community/wwwthreads.pl" target="_new">http://www.tomshardware.de/cgi-bin/community/wwwthreads.pl</A>

The loving are the daring!<P ID="edit"><FONT SIZE=-1><EM>Edited by Flinx on 08/02/03 05:35 PM.</EM></FONT></P>

 

[pIII_Man]

aww you must have cheated...did you use a translator?

Cheater cheater cheater!

3 386DX-25's...12 volts...glue some ln2 and a wicked amount of overclocking and you get a willamantee minus 36 pins, 33.75 million transistors and a couple hundred mhz...

 

[Flinx]

Go ahead and try an online translator and see what you get.
It won't quite give u a good translation or even appropriate feel.
I did look up some words in an online dictionary.
Some were not there: eg.Speicherriegel
but from similar word and the context I deduced "memory module"

The loving are the daring!

 

[pIII_Man]

well thats no fun...

Dictonary usage is not permited....it was supposed to be context clues only...jeeez

Anyhow...you think this is a p4b overclocked to 166mhz fsb or a barton w/ 166mhz fsb?

3 386DX-25's...12 volts...glue some ln2 and a wicked amount of overclocking and you get a willamantee minus 36 pins, 33.75 million transistors and a couple hundred mhz...

 

[Flinx]

I suggested it would be easier if he asked those questions on the German Forum. I'm sure there are knowledgeable people there. I think he just got a little lost

The loving are the daring!

 

[pIII_Man]

hehe...he left his country...

3 386DX-25's...12 volts...glue some ln2 and a wicked amount of overclocking and you get a willamantee minus 36 pins, 33.75 million transistors and a couple hundred mhz...