I was following this http://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/ guide and all was well. But after it found the DHCP server and said Press F12 for network boot service, I get this error.
WINDOW BOOT MANAGER
Window failed to start.A recent hardware or software change might be the cause.To fix the problem:
1. Insert your Window installation disc and restart your computer.
2.Choose your language settings,and then click Next
3.Click Repair your computer
If you do not have this disc,contact your system adminstrator or computer manufacturer for assistance
File: \Boot\BCD
Status: 0xc0000001
Info: An error occured while attempting to read the boot configuration data.
I'm doing this with a laptop, desktop on the receiving end, connected by a router(lack of crossover)
WINDOW BOOT MANAGER
Window failed to start.A recent hardware or software change might be the cause.To fix the problem:
1. Insert your Window installation disc and restart your computer.
2.Choose your language settings,and then click Next
3.Click Repair your computer
If you do not have this disc,contact your system adminstrator or computer manufacturer for assistance
File: \Boot\BCD
Status: 0xc0000001
Info: An error occured while attempting to read the boot configuration data.
I'm doing this with a laptop, desktop on the receiving end, connected by a router(lack of crossover)