2-channel snake suggestions

Archived from groups: rec.audio.pro (More info?)

Frank Stearns <franks.pacifier.com@pacifier.net> wrote:
>I've got all the 8 and 4 channel snakes needed for the kind of location
>work I do, but in the last couple of gigs have been wishing I had 2-3 sets
>of 2 channel snakes (30-60 foot range).
>
>Gepco, unfortunately, does not make a 2 channel version of their xband
>product; Belden has something in their FlexNake line but at US$1.01/foot
>(Markertek). No doubt Canare and Mogomi have something, but the sticker
>shock is always a bit much.
>
>Just curious if I've overlooked a manufacturer/source that will sell by
>the foot a braid shield product with capacitance somewhere in the mid-20s
>or maybe a bit less, and perhaps go for US$.70-.80/foot.

Gotham makes a cable that is actually two mike cables together in a sort
of siamese pair. It looks like a huge zip cord. It's a real pain for
long runs, but for a 30 foot length it is very convenient.

I admit that what I do for this sort of thing is to use two mike cables
that are coiled together. They uncoil down at the same time, and I
wrap them up together when I strike. It's not much more work than
laying out a 2-channel snake, and you can split them apart into two
cables in a pinch if you need that.
--scott


--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Archived from groups: rec.audio.pro (More info?)

"Zigakly" <no@no.no> writes:

>> I admit that what I do for this sort of thing is to use two mike cables
>> that are coiled together. They uncoil down at the same time, and I
>> wrap them up together when I strike. It's not much more work than
>> laying out a 2-channel snake, and you can split them apart into two
>> cables in a pinch if you need that.

>I do the exact same thing for room recording mic pairs, just tape them
>together 1' from each end, and they wrap/unwrap fine. I've also had a
>surprising number of incidences where 30' is just right, 25' wouldn't be
>enough, and 50' would be a pain in the ass.

Indeed. All my cables are oddball lengths (20, 30, 45, 60, 70, 115,
singles; 75' 4-channel and a pair of 135' 8 channels), suited to my review
of a number of regional venues and situations and then working in them. So
far, things have been just right! Woo hoo! (Except the current desire for
some paired pups.)

I appreciate the idea of rolling my own 2 chan cable (no pun), but have a
few minor reservations (aesthetics, consistent tangle-free/pinch and grab-
free ease of wind/unwind, that sort of thing). Cost may win out, though.

Thanks for the suggestions.

BTW -- anyone want some Belden 1805F 8 chan AES-EBU snake? I've got about
200 feet left. I'll make you a good deal. It is foil shield and therefore
should be handled with some care (but it is snake designated and lays out
quite well). It's only 13 pf/foot. That 135 feet has minimal sonic impact.

Frank Stearns
Mobile Audio

--
.