Accessing the MN-700 web interface

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

I am no longer able to access the web interface from my
computer. It is still accessible from another on the
network however. Even when I manually type in the IP of
the router nothing loads; it just stays a blank page and
it times out eventually.
The only thing I've installed that could have cause it to
mess up was some diagnostic tools from my cable isp to
perform tests on my connection. ive removed these tools
however and still no luck.
Any ideas whats wrong?
thanks!

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Thanks!
That worked, I'm able to get to is now. Those tools must
have changed my settings. Boooo to that.

>-----Original Message-----
>I assume you are using Internet Explorer?
>
>If so, goto Tools, Options
>Then the Connections tab
>Then Lan settings.
>
>Make sure everything is unchecked there.
>
>See fi that helps
>
>--
>Jason Tsang - Microsoft MVP
>
>Find out about the MS MVP Program -
>http://mvp.support.microsoft.com/default.aspx
>
>"Primal" <anonymous@discussions.microsoft.com> wrote in
message
>news:1bce901c450b3$367f7fb0$a001280a@phx.gbl...
>> I am no longer able to access the web interface from my
>> computer. It is still accessible from another on the
>> network however. Even when I manually type in the IP of
>> the router nothing loads; it just stays a blank page and
>> it times out eventually.
>> The only thing I've installed that could have cause it
to
>> mess up was some diagnostic tools from my cable isp to
>> perform tests on my connection. ive removed these tools
>> however and still no luck.
>> Any ideas whats wrong?
>> thanks!
>
>
>.
>

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

Windowsupdate, in my experience, doesn't touch those options.

Usually, it's bits from ISP's that touch that, especially to add proxy info
and the such...

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Kerry Liles" <me@privacy.net> wrote in message
news2ybuoNUEHA.712@TK2MSFTNGP11.phx.gbl...
> I think some MS Windows Updates change the settings - IIRC ... not
> necessarily the fault of the MN-700.
> Not 100% certain though.
>
>
> "Primal" <anonymous@discussions.microsoft.com> wrote in message
> news:1b65c01c450c0$389f3f80$a601280a@phx.gbl...
> > Thanks!
> > That worked, I'm able to get to is now. Those tools must
> > have changed my settings. Boooo to that.
> >
> > >-----Original Message-----
> > >I assume you are using Internet Explorer?
> > >
> > >If so, goto Tools, Options
> > >Then the Connections tab
> > >Then Lan settings.
> > >
> > >Make sure everything is unchecked there.
> > >
> > >See fi that helps
> > >
> > >--
> > >Jason Tsang - Microsoft MVP
> > >
> > >Find out about the MS MVP Program -
> > >http://mvp.support.microsoft.com/default.aspx
> > >
> > >"Primal" <anonymous@discussions.microsoft.com> wrote in
> > message
> > >news:1bce901c450b3$367f7fb0$a001280a@phx.gbl...
> > >> I am no longer able to access the web interface from my
> > >> computer. It is still accessible from another on the
> > >> network however. Even when I manually type in the IP of
> > >> the router nothing loads; it just stays a blank page and
> > >> it times out eventually.
> > >> The only thing I've installed that could have cause it
> > to
> > >> mess up was some diagnostic tools from my cable isp to
> > >> perform tests on my connection. ive removed these tools
> > >> however and still no luck.
> > >> Any ideas whats wrong?
> > >> thanks!
> > >
> > >
> > >.
> > >
>
>