P4t533-C MB memory config

[SHARKMEAT]

I have a asus P4T533-C MB and I have all four slots filled with 128 rdram/1066,now I got two sticks of 256/1066 and two 128/1066,what is the arrangement for the sticks in the four slots,the manual just shows four 128 sticks installed and two sticks with 128 with rims install.Do I put the 256 sticks in first 2 slots and the 128 in the last two slots ?. or do I sandwich them!! like 256-128-256-128.or is it 256-256-128-128.Thx for any help.

BTW I no you saying why not just do a swap untill you get a working setup.I did that once and and it lowers the damage factor by 100% if you get the right information befor doing doing unknown swaping.

TREAD SLOWLY IN DANGEROUS WATERS

 

[Crashman]

256's in the first two, 128's in the second two, at least this is how it goes on my Intel board.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[Lando95]

Yes, that is correct. Put the 256 in the first 2 slots, and the 128 in the second two. Rdram is required to run in pairs.

 

[Lando95]

Yes, that is correct. Put the 256 in the first 2 slots, and the 128 in the second two. Rdram is required to run in pairs.