Tom's Hardware > Forum > Audio > Pro Audio > Sanken CU-41 repair

Sanken CU-41 repair

Forum Audio : Pro Audio - Sanken CU-41 repair

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Anonymous   09-09-2005 at 02:38:39 PM

Archived from groups: rec.audio.pro (More info?)

 

Does anyone know where I could get a Sanken CU-41 repaired? It has a
damaged HF capsule diaphragm, verified by a visual inspection. The
capsule will need to be replaced or rediaphragmed. I spoke to Tony at
Stephen Paul Audio who recommended I send an email to "Marsh" at
marsh@promediaaudio.com in Japan, as John Hardy did here some time
back. I've received no reply after a week however, so I though I'd ask
again here. If there's anyone in the US who does it that would be
ideal, and if not then perhaps there's an alternative elsewhere.
Thanks.

Ted Spencer, NYC
tedspencerrecording.com

Add a reply
Sponsored Links
Register or log in to remove.
Anonymous   09-09-2005 at 03:40:03 PM
- 0 +

Archived from groups: rec.audio.pro (More info?)

 

prestokid@aol.com wrote:
> Does anyone know where I could get a Sanken CU-41 repaired?

You could check with the distributor, Plus 24 Marketing. Martin there
should be able to recommend someone or have a good way to get it back
"home." Write him at mucik@plus24.net
(http://www.plus24.net/contact.asp in case that e-mail address doesn't
come out right).

Reply to Anonymous
Anonymous   09-10-2005 at 04:50:18 PM
- 0 +

Archived from groups: rec.audio.pro (More info?)

 

<prestokid@aol.com> wrote:
>Does anyone know where I could get a Sanken CU-41 repaired? It has a
>damaged HF capsule diaphragm, verified by a visual inspection. The
>capsule will need to be replaced or rediaphragmed. I spoke to Tony at
>Stephen Paul Audio who recommended I send an email to "Marsh" at
>marsh@promediaaudio.com in Japan, as John Hardy did here some time
>back. I've received no reply after a week however, so I though I'd ask
>again here. If there's anyone in the US who does it that would be
>ideal, and if not then perhaps there's an alternative elsewhere.

Send it to Sanken. I suspect they'll replace the capsule with a new
one from Japan. The US Sanken rep is a good guy, and while his English
is not the best, he does good work.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Reply to Anonymous
Ask the community Add a reply
Tom's Hardware > Forum > Audio > Pro Audio > Sanken CU-41 repair
Go to:

There are 1238 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.207 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
Related Content
They won a badge
Join us in greeting them