how to overclock KINGSTON HYPERX PC3500 512MB?

[dxl]

is there any way to overclock KINGSTON HYPERX PC3500 512MB at higher than 218mhz (217mhz is what kingston claimed)?
is it going to help the perfomance?
or should i just set it at 200 and set with a lower latency?

http://www.mp3.com/dxl ASUS A7N8X, xp3200+ (218x10.5), 2xKINGSTON HYPERX PC3500 512MB(218mhz, at 2 3 3 7) segate 120g 8mb ATA100 segate 80g 2mb ATA100, Creamware pulsar2, ATI9800pro 128mb

 

[ytoledano]

Latency is less important so without overclocking, the best options is to set the FSB to 217 (it would overclock your CPU), setting it to 200 with better timings (even extremly shot ones) will give a much worse result.
If you want to overclock you can raise the FSB up a couple of MHZs at a time and see when your system ceases to be stable (if you're looking for 100% stability). You can also raise the DDRam voltage a bit but make sure that the memory has heatsinks on it and that you're taking some risk.
Overclocking RAM is a lot harder than overclocking a CPU so you might just want to go to 5:4 mode (though only if you're going for 240-250 FSB since 5:4 mode hurts performance quite a bit).

My anger and my wrath will be poured on this place on man and beast on the trees of the field and the fruit of the ground it will burn and not be quenched Jeremiah 7:20
I am ALPHA and OMEGA, burn!