Anyone know how to check total hours of head use, on a Tascam DA-30 & DA-30
MkII? It's not in the operation manual anywhere. I'd imagine it would be a
held set of key(s), while powering up. Did a Google, and couldn't find
anything except some other diagostics, but no total head use hours.
"Mike" <mikehilger@sbcglobal.net> wrote in message
news:jR4_e.350$DY.218@newssvr33.news.prodigy.com...
> Anyone know how to check total hours of head use, on a Tascam DA-30 &
> DA-30 MkII? It's not in the operation manual anywhere. I'd imagine it
> would be a held set of key(s), while powering up. Did a Google, and
> couldn't find anything except some other diagostics, but no total head use
> hours.
>
Pretty sure there is no such facility. Very few DAT's do this, it is more
often found on multitracks like DA88 etc.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.