Problem with receiving messege using at command Tags: GSM Memory Card Command Prompt Sim Card Last response: September 27, 2011 1:12 PM in Technologies Share HIT007 February 12, 2011 7:18:20 AM hi.... i can successfully send message by at command using cmgs command..... but stuck at receiving part... AT OK AT+CMGF=1 OK AT+CPIN? +CPIN: READY OK AT+CPMS? +CPMS: ,,,,,,,, OK AT+CPMS=? +CPMS: (),(),() OK ALL OTHER RECEIVE COMMAND GIVES ERROR......... I AM STUCK AT THIS POINT I CAN'T ACCESS ANY MESSAGE FROM MEMORY CARD OR PHONE MEMORY OR SIM CARD..... PLZ HELP.... More about : problem receiving messege command | E-mail me updates | Report abuse Register or log in to remove dimeworm September 27, 2011 1:12:27 PM Always check if the storage has used messages (+CPMS: 1,30,1,30,1,30) 1: Used 30: Total before calling the CMGR (read message command) | Report abuse Ask the community Publish Tom's Hardware>Forum>Technologies>Problem with receiving messege using at command> Related ressources: ForumIpconfig command problem ForumHow do i messege another computer ForumBSOD, different messege each time ForumVista wont load, loops between error messege Forumgetting a fatal error messege when faxing ForumParameter format not correct in command Prompt - Read Only.. Forumnet use command I receive an error 66 ForumNetwork sending less packets than receiving ForumHow to read newly received message using at command ? AT+CMGR=0 Forumreceiving command as an sms..... ForumBest pc pranks Forum1st boot command .com problem - new A7V133? ForumReceiving Incomplete Faxes ForumAudio Lag Receiving Voice Chat ForumSending/ Receiving faxes with Windows XP ForumCan not send e mails through Outlook Express ForumWhere can I find EL Wire in a store? Forum[Solved] How to use usb hard drive with car stereo ForumMonitor doesnt come on with vga splitter ForumWavecom modem AT Command for BAck from submenu to main menu More resources Read discussions in other Technologies categories Bluetooth GSM !