MN-700 Network Devices didn´t display

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

I Installed The MN700 Wireless base as directed in the manual for each
network computer, I share printers and some folders, but my problem is that
I can´t even look for others wireless computers on my network or print on a
share
printer, I just did everything I found about it on the internet, but nothing
seems to work. Also when I open the Microsoft Broadband Network utility, in
the Network devices field, shows a message "No devices found on the local
network", If I plug a device into an Ethernet port I Can see the computer,
but as soon as it go wireless it just disapear

I also disable my firewall, but still got the problem

Can someone help?

Thanks in advance

Archived from groups: microsoft.public.broadbandnet.hardware (More info?)

I can use the adress you said (192.168.2.1), and I use the IPConfig, as a
result the following data is shown:

Media state- Media disconected
Connection specific DNS Suffix:
IP Adress 192.168.2.115
Subnet Mask 255.255.255.0
Default gateway 192.168.2.1


<anonymous@discussions.microsoft.com> wrote in message
news:1e25901c4556f$257175a0$a601280a@phx.gbl...
Need some more info. Can you browse the Internet through
the wireless? Can you ping 192.168.2.1 wirelessly? Are
you getting a 192.168.2.x on each wireless computer? Run
Command Prompt and enter IPConfig.

>-----Original Message-----
>I Installed The MN700 Wireless base as directed in the
manual for each
>network computer, I share printers and some folders, but
my problem is that
>I can´t even look for others wireless computers on my
network or print on a
>share
>printer, I just did everything I found about it on the
internet, but nothing
>seems to work. Also when I open the Microsoft Broadband
Network utility, in
>the Network devices field, shows a message "No devices
found on the local
>network", If I plug a device into an Ethernet port I Can
see the computer,
>but as soon as it go wireless it just disapear
>
>I also disable my firewall, but still got the problem
>
>Can someone help?
>
>Thanks in advance
>
>
>.
>