PCI raid help

[treker]

Recently I thought PCI IDE and RAID controller card from www.z-cyber.net Speedway 133+raid. But this card doesn't work. I tired everything I know but with no luck. First I installed the card, then boot windows (Win XP pro, SP1) installed drivers and then I could see the card in Device manager. Now, to put disk on (I will be using only one WD120JB disk on it). If I put disk on primary IDE controller it lock up windows, I made it work on secondary IDE. Happy that windows are starting I realized that I could not see this disk in explorer (yes, disk is formatted (fat32) with stuff on it), When I go to Device manager I can see disk among Disk drives (all working). I installed new drivers from z-cyber.net, updated bios. In program SilCfg (came with the card) I can see disk, its size, but in explorer, NO
I went into administrative tools/computer management/disk management to try there but with no luck. Can't see new disk...

Here is copy/pase info from SilCfg:


SiICfg Configuration Information. 23-January-2004 21:54.47
SiICfg Version 1, 2, 0, 5


Computer Information -
Name DELTA
Windows NT 5.1
Service Pack 1
Name Unknown


Adapter 0 Information -
Chip Model PCI-680
Chip Revision 0001
Chip Type RAID
Driver Status 0
Major Version 1
Minor Version 1
File Version 1, 0, 1, 7
File Date Fri May 31 16:35:02 2002
PCI IRQ 10
PCI Bus Number 0
PCI Device Number 7

Primary Channel Information -
IDE Base Address E800
Alt Base Address E402
DMA Base Address D800
80 Pin Cable No

Master Device Information -
Master Not Present!!!

Slave Device Information -
Slave Not Present!!!

Secondary Channel Information -
IDE Base Address E000
Alt Base Address DC02
DMA Base Address D808
80 Pin Cable No

Master Device Information -
Device Type Disk
Hot Spare No
Model Number WDC WD3220JB/02FWA2 " " " " " " " " " "
Firmware Version 35.07R35
Serial Number WD/WOAGS32:663;
Current Mode UDMA 0
Supported Modes UDMA 2,UDMA 1,UDMA 0,MDMA 2,MDMA 1,MDMA 0,PIO 4,PIO 3,PIO 2,PIO 1,PIO 0
Bytes\Interrupt N/A
Media Type Nonremovable
ATA Version ATA/ATAPI-9
SMART Support Yes
SMART Enabled Yes
SMART Status OK
Look-ahead Enabled
Write Cache Enabled
Capacity 1073872681 MB

Indentify Data -
0000 427a 3fff 0200 0210 e300 0258 023f 0200
0008 0200 020e 4457 572f 414f 5347 3233 363a
0016 3336 203b 2002 2002 0203 4200 024a 3533
0024 302e 5237 3533 4457 2043 4457 3233 3032
0032 424a 302f 4632 4157 2032 2022 2022 2022
0040 2022 2022 2022 2022 2022 2022 2022 8210
0048 0200 2f00 4201 0280 0200 0207 3fff 0210
0056 023f 5e10 2877 0310 4bb0 0ff9 0200 0207
0064 0203 0278 0278 0278 0278 0200 0200 0200
0072 0200 0200 0200 0200 0200 0200 0200 0200
0080 027e 0200 366b 7f01 4203 3669 3e01 4203
0088 063f 0200 0200 0200 0200 424b 82fe 0200
0096 0200 0200 0200 0200 4bb0 0ff9 0200 0200
0104 0200 0200 0200 0200 0200 0200 0200 0200
0112 0200 0200 0200 0200 0200 0200 0200 0200
0120 0200 0200 0200 0200 0200 0200 0200 0200
0128 0201 0241 0200 0200 0200 0345 0200 0200
0136 0200 0200 0200 0200 0200 0200 0202 0201
0144 0200 0200 0200 0200 0200 0200 0200 0200
0152 0200 0200 0200 0200 0200 0200 0200 021f
0160 0200 0200 0200 0200 0200 0200 0200 0200
0168 0200 0200 0200 0200 0200 0200 0200 0200
0176 0200 0200 0200 0200 0200 0200 0200 0200
0184 0200 0200 0200 0200 0200 0200 0200 0200
0192 0200 0200 0200 0200 0200 0200 0200 0200
0200 0200 0200 0200 0200 0200 0200 0200 0200
0208 0200 0200 0200 0200 0200 0200 0200 0200
0216 0200 0200 0200 0200 0200 0200 0200 0200
0224 0200 0200 0200 0200 0200 0200 0200 0200
0232 0200 0200 0200 0200 0200 0200 0200 0200
0240 0200 0200 0200 0200 0200 0200 0200 0200
0248 0200 0200 0200 0200 0200 0200 0200 a3a5

Slave Device Information -
Slave Not Present!!!

RIO information -
Major revision 1
Minor revision 1
Array conflicts No
Number of sets 0

 

[sjonnie]

Is it assigned a drive letter in Disk Management? If not, assign it one and it will appear in explorer.

<A HREF="http://www.anandtech.com/myanandtech.html?member=114979" target="_new">My PCs</A>

 

[treker]

No, in Disk Management I don't see this new drive. I can see it only in Device manager...
Is there manual way to do assign a drive letter? Something in registry?