just a few questions, I'm new to RAID and SATA. can PATA drives be used on the SATA interface with some sort of PATA to SATA cable? and when creating a 2 disk RAID-0, does it have to one partition, or can u split it in more? eg. OS on 8GB and the rest as one partition?
thinking of bying a K8T800 motherboard, and it only has SATA in RAID, as far as I've seen, and I have a 80GB 7.200rpm PATA drive, thought I'd buy another one, and run that in raid on the SATA interface, if that's possible?
Yes, you can connect PATA drives to a SATA controller with an adaptor.
From the OS point of view, you RAID array is just one big drive. You can partition it etc., just as if it was a non-RAIDed drive.
Since you only have one drive, I recommend to forget about that one and buy two new SATA drives. That will save you the cost of the adaptors.
<i><b>Engineering is the fine art of making what you want from things you can get</b></i>
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.