SFC asks for CD always

Archived from groups: microsoft.public.windowsxp.general (More info?)

Try putting the CD in first before running SFC
Place the Win XP CD in the CD drive.
When Autoplay starts just click the X and close it.
Now try running SFC




"andrew hopper" <andrewhopper@discussions.microsoft.com> wrote in message
news:4023943C-89AD-42A9-82C2-225D30F1A68B@microsoft.com...
> Hi,
>
> I am running XP pro with SP1a installed on it.
>
> I have a bought copy of XP Pro and i slip streamed SP 1a onto a cd to ease
> installation and that is what i use.
>
> When i run SFC on this machine it continously asks for my CD regardless of
> whether it is my original disc or my slipstreamed with sp1a disc.
>
> I dont understand why it will not acknowledge these cd's please help me.
>
> PS. i have checked the hkey/lm/microsoft/current ver/setup/sourcepath
> settings and this points to my cd rom.
>
> lost
>
> really need to run sfc, i suspect damaged windows files following a wee
> virus but i cannot afford the time to backup and reinstall.
>
> HELP
>
> andy
>
> n .ireland

Archived from groups: microsoft.public.windowsxp.general (More info?)

point the SFC to the \i386 folder.

'Scannow sfc'
http://www.updatexp.com/scannow-sfc.html

regards,
ssg MS-MVP

andrew hopper wrote:

> Hi,
>
> I am running XP pro with SP1a installed on it.
>
> I have a bought copy of XP Pro and i slip streamed SP 1a onto a cd to ease
> installation and that is what i use.
>
> When i run SFC on this machine it continously asks for my CD regardless of
> whether it is my original disc or my slipstreamed with sp1a disc.
>
> I dont understand why it will not acknowledge these cd's please help me.
>
> PS. i have checked the hkey/lm/microsoft/current ver/setup/sourcepath
> settings and this points to my cd rom.
>
> lost
>
> really need to run sfc, i suspect damaged windows files following a wee
> virus but i cannot afford the time to backup and reinstall.
>
> HELP
>
> andy
>
> n .ireland

Archived from groups: microsoft.public.windowsxp.general (More info?)

In my opinion this is an engineering oversight. One that needs to be
addressed. With a good Knowledge Base article.

--
George Hester
_______________________________
""Darrell Gorter[MSFT]"" <Darrellg@online.microsoft.com> wrote in message
news:m56UMhEfFHA.1524@TK2MSFTNGXA01.phx.gbl...
> Hello Andre,
> This depends on how you installed the OS to the drive and how you created
> the cds.
> If the cds are not labeled correctly they will not be recognized as valid
> cds.
> If you installed Windows XP, then applied the service pack Windows File
> Protection is looking for two different cds, depending on which files it
is
> looking for.
> since the install points were different, then the source files locations
> are different.
> Thanks,
> Darrell Gorter[MSFT]
>
> This posting is provided "AS IS" with no warranties, and confers no rights
> --------------------
> <Thread-Topic: SFC asks for CD always
> <thread-index: AcV8LN8xvPX3U6gATGCqGXlF3H5+UA==
> <X-WBNR-Posting-Host: 81.77.177.72
> <From: "=?Utf-8?B?YW5kcmV3IGhvcHBlcg==?="
> <andrewhopper@discussions.microsoft.com>
> <Subject: SFC asks for CD always
> <Date: Tue, 28 Jun 2005 15:01:01 -0700
> <Lines: 25
> <Message-ID: <4023943C-89AD-42A9-82C2-225D30F1A68B@microsoft.com>
> <MIME-Version: 1.0
> <Content-Type: text/plain;
> < charset="Utf-8"
> <Content-Transfer-Encoding: 7bit
> <X-Newsreader: Microsoft CDO for Windows 2000
> <Content-Class: urn:content-classes:message
> <Importance: normal
> <Priority: normal
> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
> <Newsgroups: microsoft.public.windowsxp.general
> <NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
> <Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
> <Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windowsxp.general:415536
> <X-Tomcat-NG: microsoft.public.windowsxp.general
> <
> <Hi,
> <
> <I am running XP pro with SP1a installed on it.
> <
> <I have a bought copy of XP Pro and i slip streamed SP 1a onto a cd to
ease
> <installation and that is what i use.
> <
> <When i run SFC on this machine it continously asks for my CD regardless
of
> <whether it is my original disc or my slipstreamed with sp1a disc.
> <
> <I dont understand why it will not acknowledge these cd's please help me.
> <
> <PS. i have checked the hkey/lm/microsoft/current ver/setup/sourcepath
> <settings and this points to my cd rom.
> <
> <lost
> <
> <really need to run sfc, i suspect damaged windows files following a wee
> <virus but i cannot afford the time to backup and reinstall.
> <
> <HELP
> <
> <andy
> <
> <n .ireland
> <
>

Archived from groups: microsoft.public.windowsxp.general (More info?)

Hi MAP,

I did try this....copied the I386 folder to C:\ and changed the registry to
suit...no difference

"MAP" wrote:

> Change the source path to C:\
> http://www.updatexp.com/scannow-sfc.html
> --
> Mike Pawlak
>
> andrew hopper wrote:
> > Hi,
> >
> > I am running XP pro with SP1a installed on it.
> >
> > I have a bought copy of XP Pro and i slip streamed SP 1a onto a cd to
> > ease installation and that is what i use.
> >
> > When i run SFC on this machine it continously asks for my CD
> > regardless of whether it is my original disc or my slipstreamed with
> > sp1a disc.
> >
> > I dont understand why it will not acknowledge these cd's please help
> > me.
> >
> > PS. i have checked the hkey/lm/microsoft/current ver/setup/sourcepath
> > settings and this points to my cd rom.
> >
> > lost
> >
> > really need to run sfc, i suspect damaged windows files following a
> > wee virus but i cannot afford the time to backup and reinstall.
> >
> > HELP
> >
> > andy
> >
> > n .ireland
>
> --
> Mike Pawlak
>
>
>

Archived from groups: microsoft.public.windowsxp.general (More info?)

When you copy the CD-ROM contents to the disk drive, you need
to toggle another Registry key value. CDInstall must be changed from
a value of 1 to 0 (Zero). This tells SFC that it doesn't require a CD to
run. The key is found at:
HKLM\Software\Microsoft\Windows\CurrentVersion\Setup

"andrew hopper" <andrewhopper@discussions.microsoft.com> wrote in message
news:13D3D448-5FB4-493F-B326-5F9B6746A5F0@microsoft.com...
> Hi there, thanks for the input....i did try to copy the files to CI386
> and
> then point the registry to it...no difference.
>
> "S.Sengupta" wrote:
>
>> point the SFC to the \i386 folder.
>>
>> 'Scannow sfc'
>> http://www.updatexp.com/scannow-sfc.html
>>
>> regards,
>> ssg MS-MVP
>>
>> andrew hopper wrote:
>>
>> > Hi,
>> >
>> > I am running XP pro with SP1a installed on it.
>> >
>> > I have a bought copy of XP Pro and i slip streamed SP 1a onto a cd to
>> > ease
>> > installation and that is what i use.
>> >
>> > When i run SFC on this machine it continously asks for my CD regardless
>> > of
>> > whether it is my original disc or my slipstreamed with sp1a disc.
>> >
>> > I dont understand why it will not acknowledge these cd's please help
>> > me.
>> >
>> > PS. i have checked the hkey/lm/microsoft/current ver/setup/sourcepath
>> > settings and this points to my cd rom.
>> >
>> > lost
>> >
>> > really need to run sfc, i suspect damaged windows files following a wee
>> > virus but i cannot afford the time to backup and reinstall.
>> >
>> > HELP
>> >
>> > andy
>> >
>> > n .ireland
>>

Archived from groups: microsoft.public.windowsxp.general (More info?)

Actually that is not necessary. There are two values that must be changed
and this is documented. They are:

Under here in regedit:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

The values one is a REG_MULT_SZ so this use regedt32. I know that in
Windows XP this is not necessary but humour me.

Name: InstallationSources
Type: REG_MULTI_SZ:
(add this) Value: E:\W2KSP3\i386 with a carriage return

This means Windows 2000 Service Pack 3 is on disk. Do the same thing with
Windows XP SP2

The second one is:

Name: SoucePath
Type: REG_SZ
Value: H:\ENGLISH\WIN2000\ADV_SERV\

This means the source is on the CDROM one folder above i386.

You extract and put the Windows XP SP2 on disk and then match it up as you
see. The SourcePath is your ORIGINAL Windows XP CD-ROM install.

http://support.microsoft.com/defau [...] -us;885522

--
George Hester
_______________________________
"R. McCarty" <PcEngWork-NoSpam_@mindspring.com> wrote in message
news:#$fzxyJfFHA.2424@TK2MSFTNGP09.phx.gbl...
> When you copy the CD-ROM contents to the disk drive, you need
> to toggle another Registry key value. CDInstall must be changed from
> a value of 1 to 0 (Zero). This tells SFC that it doesn't require a CD to
> run. The key is found at:
> HKLM\Software\Microsoft\Windows\CurrentVersion\Setup
>
> "andrew hopper" <andrewhopper@discussions.microsoft.com> wrote in message
> news:13D3D448-5FB4-493F-B326-5F9B6746A5F0@microsoft.com...
> > Hi there, thanks for the input....i did try to copy the files to CI386
> > and
> > then point the registry to it...no difference.
> >
> > "S.Sengupta" wrote:
> >
> >> point the SFC to the \i386 folder.
> >>
> >> 'Scannow sfc'
> >> http://www.updatexp.com/scannow-sfc.html
> >>
> >> regards,
> >> ssg MS-MVP
> >>
> >> andrew hopper wrote:
> >>
> >> > Hi,
> >> >
> >> > I am running XP pro with SP1a installed on it.
> >> >
> >> > I have a bought copy of XP Pro and i slip streamed SP 1a onto a cd to
> >> > ease
> >> > installation and that is what i use.
> >> >
> >> > When i run SFC on this machine it continously asks for my CD
regardless
> >> > of
> >> > whether it is my original disc or my slipstreamed with sp1a disc.
> >> >
> >> > I dont understand why it will not acknowledge these cd's please help
> >> > me.
> >> >
> >> > PS. i have checked the hkey/lm/microsoft/current ver/setup/sourcepath
> >> > settings and this points to my cd rom.
> >> >
> >> > lost
> >> >
> >> > really need to run sfc, i suspect damaged windows files following a
wee
> >> > virus but i cannot afford the time to backup and reinstall.
> >> >
> >> > HELP
> >> >
> >> > andy
> >> >
> >> > n .ireland
> >>
>
>

Archived from groups: microsoft.public.windowsxp.general (More info?)

I did.

--
George Hester
_______________________________
"Juan I. Cahis" <jiclbch@SINBASURAattglobal.net> wrote in message
news:spf5c194mt3oef9g3d29b0lqie8n699603@4ax.com...
Dear George & friends:

Is necessary to reboot after modifying these registry variables?

"George Hester" <hesterloli@hotmail.com> wrote:

>Actually that is not necessary. There are two values that must be changed
>and this is documented. They are:
>
>Under here in regedit:
>
>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup
>
>The values one is a REG_MULT_SZ so this use regedt32. I know that in
>Windows XP this is not necessary but humour me.
>
>Name: InstallationSources
>Type: REG_MULTI_SZ:
>(add this) Value: E:\W2KSP3\i386 with a carriage return
>
>This means Windows 2000 Service Pack 3 is on disk. Do the same thing with
>Windows XP SP2
>
>The second one is:
>
>Name: SoucePath
>Type: REG_SZ
>Value: H:\ENGLISH\WIN2000\ADV_SERV\
>
>This means the source is on the CDROM one folder above i386.
>
>You extract and put the Windows XP SP2 on disk and then match it up as you
>see. The SourcePath is your ORIGINAL Windows XP CD-ROM install.
>
>http://support.microsoft.com/default.aspx?scid=kb;en-us;885522

Thanks
Juan I. Cahis
Santiago de Chile (South America)
Note: Please forgive me for my bad English, I am trying to improve it!

Archived from groups: microsoft.public.windowsxp.general (More info?)

Hello Andre,
Look at the layout.inf at the bottom are the names of the cds that could be
involved.
The dependencies are on how the installation was done.
So if you installed with the Windows XP cd then upgrade to SP1.
You are looking for some files on the Windows XP cd and some files on the
SP1 CD. So there are different volumes labels depending on your original
source of the file, so you can be prompted for different cds. You have to
use two cds or two different sources.
If you installed with slipstreamed media then you only have the one cd to
worry about, but the volume label has to be correct.
Thanks,
Darrell Gorter[MSFT]

This posting is provided "AS IS" with no warranties, and confers no rights
--------------------
<Thread-Topic: SFC asks for CD always
<thread-index: AcV8m6dznsOybOHAQz2F/P+d+sFoJw==
<X-WBNR-Posting-Host: 213.185.205.2
<From: "=?Utf-8?B?YW5kcmV3IGhvcHBlcg==?="
<andrewhopper@discussions.microsoft.com>
<References: <4023943C-89AD-42A9-82C2-225D30F1A68B@microsoft.com>
<m56UMhEfFHA.1524@TK2MSFTNGXA01.phx.gbl>
<Subject: RE: SFC asks for CD always
<Date: Wed, 29 Jun 2005 04:14:02 -0700
<Lines: 77
<Message-ID: <699DECFD-5C0E-4B6E-97F2-AB82D08DC82F@microsoft.com>
<MIME-Version: 1.0
<Content-Type: text/plain;
< charset="Utf-8"
<Content-Transfer-Encoding: 7bit
<X-Newsreader: Microsoft CDO for Windows 2000
<Content-Class: urn:content-classes:message
<Importance: normal
<Priority: normal
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
<Newsgroups: microsoft.public.windowsxp.general
<NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
<Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
<Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windowsxp.general:415787
<X-Tomcat-NG: microsoft.public.windowsxp.general
<
<Hi Darrell,
<
<When you say not labelled correctly, re you referring to the volume label
of
<the slipstreamed disc. The volume label of the original disc should be
fine
<as it is bought.
<
<What should the volume label of a slipstreamed SP1 disc be?
<
<""Darrell Gorter[MSFT]"" wrote:
<
<> Hello Andre,
<> This depends on how you installed the OS to the drive and how you
created
<> the cds.
<> If the cds are not labeled correctly they will not be recognized as
valid
<> cds.
<> If you installed Windows XP, then applied the service pack Windows File
<> Protection is looking for two different cds, depending on which files it
is
<> looking for.
<> since the install points were different, then the source files locations
<> are different.
<> Thanks,
<> Darrell Gorter[MSFT]
<>
<> This posting is provided "AS IS" with no warranties, and confers no
rights
<> --------------------
<> <Thread-Topic: SFC asks for CD always
<> <thread-index: AcV8LN8xvPX3U6gATGCqGXlF3H5+UA==
<> <X-WBNR-Posting-Host: 81.77.177.72
<> <From: "=?Utf-8?B?YW5kcmV3IGhvcHBlcg==?="
<> <andrewhopper@discussions.microsoft.com>
<> <Subject: SFC asks for CD always
<> <Date: Tue, 28 Jun 2005 15:01:01 -0700
<> <Lines: 25
<> <Message-ID: <4023943C-89AD-42A9-82C2-225D30F1A68B@microsoft.com>
<> <MIME-Version: 1.0
<> <Content-Type: text/plain;
<> < charset="Utf-8"
<> <Content-Transfer-Encoding: 7bit
<> <X-Newsreader: Microsoft CDO for Windows 2000
<> <Content-Class: urn:content-classes:message
<> <Importance: normal
<> <Priority: normal
<> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
<> <Newsgroups: microsoft.public.windowsxp.general
<> <NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
<> <Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
<> <Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windowsxp.general:415536
<> <X-Tomcat-NG: microsoft.public.windowsxp.general
<> <
<> <Hi,
<> <
<> <I am running XP pro with SP1a installed on it.
<> <
<> <I have a bought copy of XP Pro and i slip streamed SP 1a onto a cd to
ease
<> <installation and that is what i use.
<> <
<> <When i run SFC on this machine it continously asks for my CD regardless
of
<> <whether it is my original disc or my slipstreamed with sp1a disc.
<> <
<> <I dont understand why it will not acknowledge these cd's please help me.
<> <
<> <PS. i have checked the hkey/lm/microsoft/current ver/setup/sourcepath
<> <settings and this points to my cd rom.
<> <
<> <lost
<> <
<> <really need to run sfc, i suspect damaged windows files following a wee
<> <virus but i cannot afford the time to backup and reinstall.
<> <
<> <HELP
<> <
<> <andy
<> <
<> <n .ireland
<> <
<>
<>
<

Archived from groups: microsoft.public.windowsxp.general (More info?)

OK that is when installing new Windows Components you get queried for the
Windows XP SP1 CD-ROM. Yes the two are related. But in this case
addressing the SFC issue I had explained one way it can be done. Your way
works for this reason:

"When you add a Windows component, Setup tries to locate the I386 folder
that contains the source files." This is always true be it Windows
Components or SFC.

They go on to say, "To work around this problem, click OK in the message
box, and then specify the correct location of the service pack source
files." Which is kind of funny because you don't have that option in
failure of SFC.

So let's take a look at how they say to avoid this in ythe future. Remember
when Windows is updating from Components or SFC it is looking for an i386
folder. The mkdir is really not necessary. Extracting the Service Pack by
default installs everything in a i386 folder.

So now the article wants you to take everying in subfolders new and ip of
i386 and copy them to i386. Interesting.

I don't know why this is necessary but what works works that's good enough
for me. But for the SFC issue it is not necessary. Change the two registry
entries I mentioned and leave the SP on disk. This is a Network install so
it is keeping the SP on disk also.

--
George Hester
_______________________________
"Juan I. Cahis" <jiclbch@SINBASURAattglobal.net> wrote in message
news:8k36c19blfh46c4s8du3302i71l62aclo9@4ax.com...
Dear friends, I solved this problem, some time ago, following the most
strange hint I got looking tons of Microsoft related information. Here
is what I did, and please let me know if you find any logic on it. For
me, this is the proof that SFC is very buggy, please read the
following:

Before I installed SP2, I could run "SFC /scannow" without any
problem, but after I installed it, I could not run it again. Always I
got the message that SFC needed the SP2 CD-ROM.

But I never had the CD-ROM. I downloaded the full SP2 (266 MB) from
Microsoft from the net, and I unpacked it to a "C:\SPSource"
subdirectory on my hard disk. Then, I installed SP2 from then
"C:\SPSource\I386\Update" subdirectory without any problem.

But SFC never worked again. Thousand times I checked the
"SourcePackSourcePath" and "SourcePath" registry variables, and other
related variables that it were mentioned in this newsgroup related to
SFC, and all were OK. But the problem persisted.

Finally, I found Microsoft's article Q328096, from the year 2002!!!
Although not related to SP2, it is related to SP1 and SFC. It
recommends to copy the contents of two of the Service Pack's
subdirectories to the Service Pack's *base* subdirectory ("I386" ). And
that means to copy hundreds of files!!!

In my case, that meant to do the following:

COPY C:\SPSource\I386\new\*.* C:\SPSource\I386
COPY C:\SPSource\I386\ip\*.* C:\SPSource\I386

and then, SFC ran OK!!!

But, does this solution have any logic? Is there a better one? If
this is the only solution to the problem, then SFC is a buggy program,
why Microsoft has not corrected it?



"George Hester" <hesterloli@hotmail.com> wrote:

>I would don't know for sure but that's what I do.

Thanks
Juan I. Cahis
Santiago de Chile (South America)
Note: Please forgive me for my bad English, I am trying to improve it!

Archived from groups: microsoft.public.windowsxp.general (More info?)

Dear George, my question is, if I do the subdirectory copies that
solved my problem, am I doing wrong? In other words, what happens if I
replace a file in the \I386 subdirectory of the service pack with
another file with the same name but different, from the \I386\ip
subdirectory? Can that be happen?

"George Hester" <hesterloli@hotmail.com> wrote:

>Hetre is a little more information on this. Although the article says it
>applies to Windows 2000, I believe it applies to Windows XP as well file
>names changed appropriately.
>
>http://support.microsoft.com/default.aspx?scid=kb;en-us;274215

Thanks
Juan I. Cahis
Santiago de Chile (South America)
Note: Please forgive me for my bad English, I am trying to improve it!