Archived from groups: microsoft.public.broadbandnet.hardware (
More info?)
Set it to obtain an IP from the "server," or assign a local
static IP such 192.168.2.2, mask 255.255.255.0, gateway and
DNS 192.168.2.1. Plug the NT into one of the router ports,
and use IE to configure the router by going to 192.168.2.1
(if you haven't done before). In addition, if using a local
static IP, change the DHCP base from 192.168.2.2 to
192.168.2.3 on the LAN screen of the router.
If you need to make services available to Internet users,
you'll need to open the appropriate ports.
>-----Original Message-----
>Does anyone know how to connect a machine running NT
>Server 4.0 to the internet through the MN700 base station?
>
>Thanks
>.
>