Have you set the timings and FSB manually since installing the RAM? The timings should be set to 2.5-3-2-8 (Cas - Ras to Cas delay - Ras precharge - Tras) and the FSB to 200. Also, make sure that the RAM is getting 2.6 volts.
You need to hit ctrl+f1 to get into it hidden memory settings within BIOS.
As this is a dual channel memory board, you need to make sure that you have memory in the proper slots. Should be in slots 1 & 2
<pre><font color=red>°¤o,¸¸¸,o¤°`°¤o \\// o¤°`°¤o,¸¸¸,o¤°
And the sign says "You got to have a membership card to get inside" Huh
So I got me a pen and paper And I made up my own little sign</pre><p></font color=red>