Closed Sat cruiser101 Tags: Tell Us Tom's Guide Last response: May 15, 2011 9:23 AM in Tom's Guide Share Mort Friedland November 21, 2010 2:57:40 PM Hi Tom's Hardware Up to yesterday my SAT CRUISER DSR 101 Plus+ was working just fine. Trouble started! There is now NO signal sent to the TV set. There is no info shown on the sat cruiser screen. All I get is a RED DOT on the screen and nothing else. It does not respond to the remote and fresh batteries were installed. I would be greatful for any assistance, Sincerely MORT the SPORT in MONTREAL More about : sat cruiser101 | Report abuse Register or log in to remove Reynod November 24, 2010 11:03:24 AM http://www.satcruiser.com/dsr-101_programming.htm http://www.satcruiser.com/trouble_shooting.htm | Report abuse Reynod May 15, 2011 9:23:12 AM This topic has been closed by Reynod | Report abuse Ask the community Publish Tom's Hardware>Forum>Tom's Guide>Sat cruiser101> Related ressources: ForumWhat to use my old, but decent, desktop for? More resources Read discussions in other Tom's Guide categories Article Discussions Microsoft Zune Polls Tell Us !
Mort Friedland November 21, 2010 2:57:40 PM Hi Tom's Hardware Up to yesterday my SAT CRUISER DSR 101 Plus+ was working just fine. Trouble started! There is now NO signal sent to the TV set. There is no info shown on the sat cruiser screen. All I get is a RED DOT on the screen and nothing else. It does not respond to the remote and fresh batteries were installed. I would be greatful for any assistance, Sincerely MORT the SPORT in MONTREAL More about : sat cruiser101 | Report abuse
Reynod November 24, 2010 11:03:24 AM http://www.satcruiser.com/dsr-101_programming.htm http://www.satcruiser.com/trouble_shooting.htm | Report abuse