MiTac 6513WU - Presario 7594

[Guest]

Archived from groups: alt.sys.pc-clone.compaq (More info?)

Does anyone know the max processor speed this board will accept?

Best I can do is:

http://www.mitac.com/micweb/products/tyan/6513wu/6513wu.htm

which doesn't quite go that far.

Thanks.
_________________________________________________________________
JG... Jeff Givens
mailto:jgivensXX@comcastXX.netXX

"My hovercraft is full of eels."

 

[hh]

Archived from groups: alt.sys.pc-clone.compaq (More info?)

The onboard Intel 810E chipset should handle just about any Celeron or PIII
processor, short of a Tualatin. If you go with a 133MHz bus PIII, be sure to
swap out the preinstalled DIMMs with PC133 DIMMs.
HH

"Jeff Givens" <jgivensXX@comcastXX.netXX> wrote in message
news:c3kli0d0c65uvfp83js4a1qoecsbga1r30@4ax.com...
> Does anyone know the max processor speed this board will accept?
>
> Best I can do is:
>
> http://www.mitac.com/micweb/products/tyan/6513wu/6513wu.htm
>
> which doesn't quite go that far.
>
> Thanks.
> _________________________________________________________________
> JG... Jeff Givens
> mailto:jgivensXX@comcastXX.netXX
>
> "My hovercraft is full of eels."

 

[Guest]

Archived from groups: alt.sys.pc-clone.compaq (More info?)

On Tue, 24 Aug 2004 05:46:12 -0400 "HH" <hahunt42@hotmail.com> wrote:

>The onboard Intel 810E chipset should handle just about any Celeron or PIII
>processor, short of a Tualatin. If you go with a 133MHz bus PIII, be sure to
>swap out the preinstalled DIMMs with PC133 DIMMs.

Just picked up a 1 GHz 0.18 Celeron, should work nicely. Thx for info.
_________________________________________________________________
JG... Jeff Givens
mailto:jgivensXX@comcastXX.netXX

"My hovercraft is full of eels."

 

[hh]

Archived from groups: alt.sys.pc-clone.compaq (More info?)

If it has a 256K L2 cache it's a Tualatin Celeron and will not work. If it
has a 128K L2 cache, it's a Coppermine 1.1GHz Celeron and should work fine.
HH

"Jeff Givens" <jgivensXX@comcastXX.netXX> wrote in message
news:uhlmi09l0q1ihro9f2ak10g2q6mivuotj0@4ax.com...
> On Tue, 24 Aug 2004 05:46:12 -0400 "HH" <hahunt42@hotmail.com> wrote:
>
> >The onboard Intel 810E chipset should handle just about any Celeron or
PIII
> >processor, short of a Tualatin. If you go with a 133MHz bus PIII, be sure
to
> >swap out the preinstalled DIMMs with PC133 DIMMs.
>
> Just picked up a 1 GHz 0.18 Celeron, should work nicely. Thx for info.
> _________________________________________________________________
> JG... Jeff Givens
> mailto:jgivensXX@comcastXX.netXX
>
> "My hovercraft is full of eels."

 

[dooney]

do you have to reset bios
after the cpu upgrade

 

[dooney]

do you have to reset bios
after the cpu upgrade on presario 7594 windows 98se,