PC3200 run at 2100 speed?

[lonelypauly]

Will most PC3200 modules run as low as 266mhz/PC2100?

<b><font color=blue>Athlon64 3200+ Winchester/MSI Neo4 Platinum SLI/MSI 6800 Ultra/1 GB Kingston HyperX (Dual Channel)/74GB WD Raptor/600Watt Enermax Noisetaker/ Dual Mitsubishi 21 Inch Monitors</b></font color=blue>

 

[Crashman]

All modules are rated at the maximum gaurenteed operating speed. There is no minimum. PC4000 will run at DDR200 (PC1600 speed) if you want. PC133 will run as PC66 if you like, etc.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[lonelypauly]

ok, so even if there's a PC2100 module in the board already, it won't cause any problems/conflicts?

<b><font color=blue>Athlon64 3200+ Winchester/MSI Neo4 Platinum SLI/MSI 6800 Ultra/1 GB Kingston HyperX (Dual Channel)/74GB WD Raptor/600Watt Enermax Noisetaker/ Dual Mitsubishi 21 Inch Monitors</b></font color=blue>

 

[Crashman]

Not so long as BIOS doesn't object. A few boards only allow you to run certain approved SPD values based on what BIOS allows, most boards don't have that limitation.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[lonelypauly]

cool, thanks.

<b><font color=blue>Athlon64 3200+ Winchester/MSI Neo4 Platinum SLI/MSI 6800 Ultra/1 GB Kingston HyperX (Dual Channel)/74GB WD Raptor/600Watt Enermax Noisetaker/ Dual Mitsubishi 21 Inch Monitors</b></font color=blue>