Sign in with
Sign up | Sign in
Your question

IRQ conflicts?

Last response: in Home Audio
Share
November 6, 2009 12:59:04 PM

I have a Dell T3400 workstation with Vista 64 Ultimate that I am using for editing video with Vegas Video Pro 9.0c. I have a PreSonus Firepod external firewire sound card that is hooked up to a PCI firewire card.

I am not sure, but I think I am having IRQ conflicts. When I select the Firepod in Windows Sound, the sound usually works well for a while after a fresh bootup, but then after a few hours (give or take a few hours), it drops out. Sometimes I can get the sound back by switching from 44.1 to 48.0 HMz (or vice versa), which is what leads me to believe I ay have an IRQ conflict). Other times I have to reboot in order to get sound back. THen other times, even rebooting does not help, and so I have to switch to external speakers. I can run that way, but I cannot use any of the XLR-inputs, meaning I cannot record, or dub.

I checked the IRQ assignments, and I have seven different devices assigned to PCI (IRQ) 16. I am told that one can reassign them in XP, but not in Vista (or in 7). Are IRQ's assigned by the motherboard? Or by the chipset? And why can I not manually reassign them in Vista? If I had a different motherboard, would I likely get different IRQ assignments?

I tried inserting a picture, but I could not figure out how to search by URL, unless this is it.

PCI 16 has:
High Definition Audio Controller (Motherboard audio?)
Intel ICH9 Family PCI Express Root Port 1 - 2940
Intel ICH9 Family USB Universal Host Controller - 2937
Intel X38 Express Chipset PCI Express Root Port - 29E1
NVIDIA GeForce GTX260
PCI standard PCI-to-PCI bridge
Texas Instruments OHCI Compliant IEEE 1394 Host Contoller (new firewire card with TI chipset)

The first entry is Windows Sound, and the last entry is the firewire card, which runs the Firepod/firewire card. I imagine that having them both on PCI 16 is my problem, but since Microsoft did not enable manual reassignment of IRQ's with Vista, I don't know how to change it.

Is there some way to get different IRQ assignments, short of a new motherboard?

Thank you.

More about : irq conflicts

November 6, 2009 1:14:41 PM

Easiest try is to reseat your sound card. Unplug it. Boot, then replug it, boot. It may reassign by itself
m
0
l
November 8, 2009 1:16:17 AM

I swapped my pci firewire card, and my pci e-sata card, in order to try to get a new IRQ assignment, and now it hangs during boot (four times).

Obviously I will have to switch the cards back, but is that normal?

Thanks.
m
0
l
Related resources
November 8, 2009 1:47:04 AM

It boots fine with the cards back in the original slots, but I still have both:
a. High Definition Audio Controller (motherboard audio) and
b. Texas Instruments OHCI Compliant IEEE 1384 Controller
assigned to PCI IRQ 16.

So basically I cannot use my external firewire card, because Windows Sounds is going to blow it off.

Do you suppose it would help to shut off Windows Sound in the BIOS?
m
0
l
November 8, 2009 1:53:42 AM

Windows Audio is now off.

The problem is intermittent, so it should take a few days to know.
m
0
l
November 8, 2009 4:08:49 AM

Nope. I just lost sound.

Motherboard audio is off, and I still lost sound.

Does Dell assign all PCI cards in the world to IRQ 16? And is this why I am getting the conflict/losing sound? Or is there another reason?
m
0
l
Anonymous
November 8, 2009 7:25:52 AM

If you can find these settings in the motherboard BIOS, disable any devices you won't be using; joystick port, COM ports, Parallel Printer Port (if using USB printer). Then start and close Windows a couple of times so that IRQs can be reassigned.
m
0
l
November 8, 2009 6:37:42 PM

Yea, if youre not using them, as its too crowded
m
0
l
!