I think my hard disk has some bad sectors, ths o/s always crash than restart. The problem solved after I run SeaTools, but the windows chkdsk start to appear in every startup, checks my D: drive. following is my seatools report. Anyone know how to disable chkdsk?
SeaTools Desktop v3.02.03
Copyright (c) 2005 Kroll Ontrack Inc.
8/12/2005 @ 7:54 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 10/14/04
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
120 GB ST3120026AS
Serial Number = 3JT2QXCH
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 14593x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 3549 29201
EXTENDED
2 NTFS 3550 14592 90837
Diagnostic Results:
Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 12-Aug-2005 18:47:49
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3120026AS
Serial Number: 3JT2QXCH
Firmware Revision: 3.05
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 234441648 Sectors
ID Method: Unknown
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 7683072
Estimated PIO Transfer Rates
Min: 2.25MB/s Max: 2.32MB/s Avg: 2.29MB/s
Estimated DMA Transfer Rates
Min: 68.72MB/s Max: 85.90MB/s Avg: 83.50MB/s
SMART Check: Passed
Short Test Passed: 12-Aug-2005 18:48:27
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 12-Aug-2005 18:48:28
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3120026AS
Serial Number: 3JT2QXCH
Firmware Revision: 3.05
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 234441648 Sectors
ID Method: Unknown
SMART Check: Passed
Full Scan (0 to 234441648) - Passed
Elapsed Time: 1.01 Hours
Estimated Internal Transfer Rates
Min: 12.69Mb/s Max: 450.14Mb/s Avg: 277.30Mb/s
PIO/DMA Data Compare
Total Bytes = 20889600
Estimated PIO Transfer Rates
Min: 2.25MB/s Max: 2.33MB/s Avg: 2.30MB/s
Estimated DMA Transfer Rates
Min: 67.08MB/s Max: 83.85MB/s Avg: 82.00MB/s
Long Test Passed: 12-Aug-2005 19:48:58
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (29.1 GB) ) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (NTFS (90.8 GB) DISK2_VOL2) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
========================================================
<P ID="edit"><FONT SIZE=-1><EM>Edited by amaz on 08/12/05 09:28 PM.</EM></FONT></P>
SeaTools Desktop v3.02.03
Copyright (c) 2005 Kroll Ontrack Inc.
8/12/2005 @ 7:54 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 10/14/04
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
120 GB ST3120026AS
Serial Number = 3JT2QXCH
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 14593x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 3549 29201
EXTENDED
2 NTFS 3550 14592 90837
Diagnostic Results:
Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 12-Aug-2005 18:47:49
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3120026AS
Serial Number: 3JT2QXCH
Firmware Revision: 3.05
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 234441648 Sectors
ID Method: Unknown
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 7683072
Estimated PIO Transfer Rates
Min: 2.25MB/s Max: 2.32MB/s Avg: 2.29MB/s
Estimated DMA Transfer Rates
Min: 68.72MB/s Max: 85.90MB/s Avg: 83.50MB/s
SMART Check: Passed
Short Test Passed: 12-Aug-2005 18:48:27
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 12-Aug-2005 18:48:28
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3120026AS
Serial Number: 3JT2QXCH
Firmware Revision: 3.05
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 234441648 Sectors
ID Method: Unknown
SMART Check: Passed
Full Scan (0 to 234441648) - Passed
Elapsed Time: 1.01 Hours
Estimated Internal Transfer Rates
Min: 12.69Mb/s Max: 450.14Mb/s Avg: 277.30Mb/s
PIO/DMA Data Compare
Total Bytes = 20889600
Estimated PIO Transfer Rates
Min: 2.25MB/s Max: 2.33MB/s Avg: 2.30MB/s
Estimated DMA Transfer Rates
Min: 67.08MB/s Max: 83.85MB/s Avg: 82.00MB/s
Long Test Passed: 12-Aug-2005 19:48:58
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (29.1 GB) ) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (NTFS (90.8 GB) DISK2_VOL2) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
========================================================
<P ID="edit"><FONT SIZE=-1><EM>Edited by amaz on 08/12/05 09:28 PM.</EM></FONT></P>
Facebook
Twitter
Instagram