Boot no longer visible through DVI on Benq241w

Can someone help me out please?

Suddenly my benq241w does not show boot until vista starts. The VGA is still working OK. Is it possible that this is because my wife first connected digital camera through a side usb ports, then turned on the monitor, then computer?

I have been reading about corrupted EDID issue - if so does anybody have working EDID file (either bin or other format readable by EDID programmers)

Thanks,

Peter.

Hi,

I have only one monitor. I tried various combinations of resets, including removing USB connection to my photo camera. (not USB webcam). I also tried a few solutions found here:

http://www.avsforum.com/avs-vb/showthread.php?t=656032
http://www.tomshardware.com/forum/ [...] c-vx2025wm
http://hardforum.com/showthread.ph [...] 780&page=2
http://www.howtofixcomputers.com/bb/sutra869611.html


http://www.avsforum.com/avs-vb/arc [...] 56032.html
http://www.techspot.com/vb/all/win [...] ution.html

http://komeil.spaces.live.com/blog [...] !252.entry
http://www.hardforum.com/showpost. [...] stcount=23
http://forums.entechtaiwan.com/index.php?topic=6905.0

One thing that did not work was the dvi recovery, but it is expected, since it was written for older cards and older monitors.
Right now I am at the point of looking for EDID values so that I can see if these are corrupted.

Peter.