FA: Here we go again? Guns R ramp

Archived from groups: rec.games.pinball (More info?)

Not mine but noticed on EBay tonight. Good luck whoever needs it.
Wondering if that special someone who bought the "G" ramp last month
for 500+ needs an "R" ramp to go with it. Will this top the "G" ramp
or does the "G" ramp just take more abuse than this one? I figure it
won't pull in the same. Just my thoughts.
Lewis

Archived from groups: rec.games.pinball (More info?)

I think the last one only hit close to 200. I have seen them go for less.
It is the other one that seems to break, to close to siderail, coil puts
stress cracks on ramp, etc...

Trin
<lewben11@yahoo.com> wrote in message
news:1118641649.881721.63570@z14g2000cwz.googlegroups.com...
> http://cgi.ebay.com/ws/eBayISAPI.d [...] eName=WDVW
>
> That helps
> Lewis
>

Archived from groups: rec.games.pinball (More info?)

This one doesn't break as much, and although a still hard part to find, not
made of unobtanium at all as the G ramp. On about 6 GNR machines I have seen
on the last few years, G ramp was abused on all of them and R ramp help just
fine (some small cracks etc... but very presentable). I think it's the steep
angle, curvature and many breaking points on G ramps that make it so abuse
prone.

Adi
www.txpinball.com


<lewben11@yahoo.com> wrote in message
news:1118641427.774417.142000@f14g2000cwb.googlegroups.com...
> Not mine but noticed on EBay tonight. Good luck whoever needs it.
> Wondering if that special someone who bought the "G" ramp last month
> for 500+ needs an "R" ramp to go with it. Will this top the "G" ramp
> or does the "G" ramp just take more abuse than this one? I figure it
> won't pull in the same. Just my thoughts.
> Lewis
>