Tom's Hardware > Forum > Games General > Games General Discussions > Spy Hunter pinball end of stroke

Spy Hunter pinball end of stroke

Forum Games General : Games General Discussions - Spy Hunter pinball end of stroke

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Anonymous   06-15-2005 at 05:16:51 PM

Archived from groups: rec.games.pinball (More info?)

 

does any have the double switch end of stroke for a SPy Hunter bally
pinball machine? or know where to order it?
thanks,
jeff rank

Add a reply
Sponsored Links
Register or log in to remove.
Anonymous   06-15-2005 at 06:32:18 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

If you have a setup that uses 2 high voltage (flipper power) switches on it
(usually used to control an upper/second flipper on the same side), then you
can just use two (2) Williams 03-7811 EOS switches, back-to-back, with some
insulation in between (re-use old nylon spacer or fische paper insulator).
We use these on all the dual-flipper games- Williams, Bally, Stern, Game
Plan, etc. They work well.

The original Bally parts are long since discontinued and no longer being
made. But we have the Williams ones in stock- see our website at:
www.actionpinball.com

Ray J.
--
Action Pinball & Amusement, LLC
Salt Lake City, Utah USA
Web: www.actionpinball.com

We're serious about pinball. Anything else is just for fun!



<surfsled@hotmail.com> wrote in message
news:1118859411.232352.124140@z14g2000cwz.googlegroups.com...
> does any have the double switch end of stroke for a SPy Hunter bally
> pinball machine? or know where to order it?
> thanks,
> jeff rank
>

Reply to Anonymous
Anonymous   06-15-2005 at 06:52:38 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

Jeff if you're going to be at the tournament in Lyons tonite and want
me to bring some of these switches as Raymond is suggesting let me know.
Not a problem. Dave

Ray Johnson - Action Pinball wrote:
>
> If you have a setup that uses 2 high voltage (flipper power) switches on it
> (usually used to control an upper/second flipper on the same side), then you
> can just use two (2) Williams 03-7811 EOS switches, back-to-back, with some
> insulation in between (re-use old nylon spacer or fische paper insulator).
> We use these on all the dual-flipper games- Williams, Bally, Stern, Game
> Plan, etc. They work well.
>
> The original Bally parts are long since discontinued and no longer being
> made. But we have the Williams ones in stock- see our website at:
> www.actionpinball.com
>
> Ray J.
> --
> Action Pinball & Amusement, LLC
> Salt Lake City, Utah USA
> Web: www.actionpinball.com
>
> We're serious about pinball. Anything else is just for fun!
>
> <surfsled@hotmail.com> wrote in message
> news:1118859411.232352.124140@z14g2000cwz.googlegroups.com...
> > does any have the double switch end of stroke for a SPy Hunter bally
> > pinball machine? or know where to order it?
> > thanks,
> > jeff rank
> >

--

Dave Mercer
For Amusement Only
943 Butte Pass Dr
Fort Collins, CO 80526
970-282-8282
970-223-2372 fax
Paypal payments can be made to
paypal@foramusementonly.to
Please visit our website for your pinball needs
http://www.foramusementonly.to

Reply to Anonymous
Anonymous   06-19-2005 at 07:43:15 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

Ok Spy Hunter pinball.
the new EOS switches keep blowing the F4?(4 amp) fuse upon firing the
coil and the upper flipper still will not work. Does anyone know the
correct wiring scheme for the coil and EOS switches for this pinball to
make sure I have all the ducks lined up in a row.
thanks
jeff rank

surfsled@hotmail.com wrote:
> does any have the double switch end of stroke for a SPy Hunter bally
> pinball machine? or know where to order it?
> thanks,
> jeff rank

Reply to Anonymous
Anonymous   06-19-2005 at 07:45:22 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

oh yeah its the bottom right flipper on the game . i don't know both
flippers are supposed to be the same wiring or not.

Reply to Anonymous
Anonymous   06-19-2005 at 07:45:24 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

oh yeah its the bottom right flipper on the game . i don't know both
flippers are supposed to be the same wiring or not.

Reply to Anonymous
Anonymous   06-19-2005 at 07:45:27 PM
- 0 +

Archived from groups: rec.games.pinball (More info?)

 

oh yeah its the bottom right flipper on the game . i don't know both
flippers are supposed to be the same wiring or not.

Reply to Anonymous
Ask the community Add a reply
Tom's Hardware > Forum > Games General > Games General Discussions > Spy Hunter pinball end of stroke
Go to:

There are 592 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.174 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them