Tech: Cue Ball Wizard

[Guest]

Archived from groups: rec.games.pinball (More info?)

I picked up a Cue Ball Wizard that has resistor R-2 cut off the bottom
side of the playfield. I have a book but can not determine the
resistor value. Any help would be appreicated. Also still looking for
the light shields that look like pool balls that go in the ramps.
Thanks Arnie

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

looks like (page 62)

R1-R8 Resistor, 4.7K OHM, 1/4W, 5% Part No XO-7

I'd check with PBR as well for this part. Have seen the Ball shields
on Ebay a few times this year, don't believe Steve has them (last time
I asked).

-Ed

jchristensen3@neb.rr.com wrote:
> I picked up a Cue Ball Wizard that has resistor R-2 cut off the bottom
> side of the playfield. I have a book but can not determine the
> resistor value. Any help would be appreicated. Also still looking for
> the light shields that look like pool balls that go in the ramps.
> Thanks Arnie

 

[otto]

Archived from groups: rec.games.pinball (More info?)

Pbr used to have them.

Otto

CARGPB11

My web page: http://home.bellsouth.net/p/PWP-Ottoslanding

<jchristensen3@neb.rr.com> wrote in message
news:1118861441.101967.23420@g49g2000cwa.googlegroups.com...
> Also still looking for
> the light shields that look like pool balls that go in the ramps.