Sign in with
Sign up | Sign in
Your question

XLR and TRS mics conected at the same time??

Last response: in Home Audio
Share
March 15, 2010 3:46:34 AM

Hello Everyone. i have a question.

I'm trying to buy a Cheap PA system. I'm leaning towards .

i know Yamaha is better but I'm short on $$$. its mainly for Sunday church chorus. we have around 5-7 vocals and 1 electro-acoustic guitar and 1 mic for acoustic guitars.

my question is can i connect one mic in the XLR plug and another one or maybe a guitar on the TRS plug. on the same channel?

or would you kindly recommend a budget PA system for my needs?

thanks a lot in advanced.

March 22, 2010 1:38:44 AM

any one that can help me here?

please
m
0
l
March 22, 2010 12:04:31 PM

Hi,

Here's the Powerpod powered series mixer manual:
http://www.connevans.com/instructions/40SFSYS10_user_manual.pdf

Try to read it. You'll also find a diagram at page 23.
You can notice that the TRS input will interrupt the XLR signal when a TRS jack is inserted.

Although I don't see the same for the stereo inputs (maybe the diagram is wrong), I don't recommend using both XLR and TRS inputs of a channel in the same time for a couple of reasons - for one, you can't adjust individual characteristics of each input, and second - you may damage the microphones or induce undesired distortions.

If you need more inputs for microphones, consider using a mixer with more inputs.

Cheers.
m
0
l
March 23, 2010 3:11:26 AM

Thank you very Much DR_M0rph3us.

i did get the manual before, but i never liked those kinds of diagrams, so i skiped that part.

i guess ill by a mixer with more inputs.

thanks again
m
0
l
!