Wlliams / Bally shaker motor question?

[Guest]

Archived from groups: rec.games.pinball (More info?)

Does any one know what the Wlliams / Bally shaker motor uses
regarding:

DC or AC voltage to the motor

Voltage to the motor

Thanks for any information.

Please email:
Indybones@sbcglobal.net

 

[Guest]

Archived from groups: rec.games.pinball (More info?)

The shaker motor used in Bally's Harley Davidson runs off the flash lamp
supply - 20 volts DC (unregulated). The flash lamp power is switched via the
high current driver board located on the left inner cabinet side near the
shaker motor; the high current driver board is controlled via one of the low
power solenoids (via J124).

Joseph "Tony" Dziedzic

In article <7breb11t57g3mkjslm4ero08ahq2oj74li@4ax.com>, IndyPinball
<indybones@sbcglobal.net> wrote:
>Does any one know what the Wlliams / Bally shaker motor uses
>regarding:
>
>DC or AC voltage to the motor
>
>Voltage to the motor
>
>Thanks for any information.
>
>Please email:
>Indybones@sbcglobal.net
>