Cmos battery, blank screen

[Guest]

Archived from groups: comp.sys.hp.hardware (More info?)

Hi,
I've changed my CMOS battery on the motherboard. But I forgot to
write down the CMOS settings. Now It gives me a blank screen, nothing
at all even the logo. What can I do now to bring it back to work.
Thanks in advance

Jerry

 

[Guest]

Archived from groups: comp.sys.hp.hardware (More info?)

<zhuxiaohang@hotmail.com> wrote in message news:1115856245.307580.147370@f14g2000cwb.googlegroups.com...
Date: 11 May 2005 17:04:05 -0700

Hi, I've changed my CMOS battery on the motherboard. But I
forgot to write down the CMOS settings. Now It gives me a blank
screen, nothing at all even the logo. What can I do now to
bring it back to work. Thanks in advance

Hi Jerry... What model number are we talking about here? Even having
the wrong CMOS (BIOS) settings shouldn't dump the display, unless
you have more than one video card installed. In that case, the one
built into the motherboard is probably running by default. If you
think this is a possibility, swap the video plug until Windows boots
up. Then change the default display.




Cheers!


__________________________________________________
Bill (using a Toshiba 2595XDVD under Windows 2000)
-- written and edited within WordStar 5.0