xp2000 Palomino vcore 1.85v???

tguzella

Distinguished
May 20, 2003
6
0
18,510
i have a athlon xp 2000 on a asus a7v8x. The vcore is set to auto on the mainboard, and is currently at 1.85v. is it too high??? should i set it to manual and input 1.75 v (original specification for my Palomino)??? or should i leave it this way?? my only concern is that the processor might be running just a little bit too hot...
 

TheMASK

Distinguished
Apr 23, 2003
1,510
0
19,780
hey, i have the same mobo too. If ur CPU temp remains below 60C at full load, then this Vcore is fine. if the temp is above 65C at full load, u need to reduce the Vcore.

If sometimes you feel little, useless, offended or depressed or get that loser feeling, always remember that you were once the fastest and most victorious sperm out of hundreds of millions...