G
Guest
Guest
Archived from groups: rec.games.pinball (More info?)
Hey gang,
I'm having some trouble tracking down a few parts I'd like to get to finish
off my Diner playfield. Some are generic parts, others are "game" specific.
If anyone can help me out, that would be great. Just give me a holler!
I've checked with most of the usual sources:
> - A-13278 Plunger Assembly
The diverter plunger spring has cracked off on mine.
> - 02-4269-4 Ramp Mounting Post 3"
> - 02-4269-5 Ramp Mounting Post 4"
> - Spinner decal foil
> - 31-1008-571 Screened Bottom Arch
> - 3 red bumper caps
> - There are those flashers that screw into these holders that "snap" into
> the ramps. I have two of the holders with broken tabs.
Dave at FAO graciously provided me part numbers: the flasher bases are
03-8172-13 dome receptacles-clear
>
> - Small standoffs for the outlane plastics/slingshots. Four small ones
> are missing on mine (they go between the metal lane and the playfield,
> metal lane and the sling plastic, and sling plastic and the clear plastic
> above it).
- Here is a weird one. Those little white "circuit board" holders that
screw into the BOTTOM of the playfield. They hold the small circuit board
at the bottom right of the playfield to the playfield itself and the board
snaps into them. All four of mine were broken off so the board is just
dangling there.
Thanks for any help you guy scan give me!!
Chris
--
-------------------------------------------
Bucci's Pinball Arcade
"My collection & obsession online"
http://www.buccisarcade.com
Hey gang,
I'm having some trouble tracking down a few parts I'd like to get to finish
off my Diner playfield. Some are generic parts, others are "game" specific.
If anyone can help me out, that would be great. Just give me a holler!
I've checked with most of the usual sources:
> - A-13278 Plunger Assembly
The diverter plunger spring has cracked off on mine.
> - 02-4269-4 Ramp Mounting Post 3"
> - 02-4269-5 Ramp Mounting Post 4"
> - Spinner decal foil
> - 31-1008-571 Screened Bottom Arch
> - 3 red bumper caps
> - There are those flashers that screw into these holders that "snap" into
> the ramps. I have two of the holders with broken tabs.
Dave at FAO graciously provided me part numbers: the flasher bases are
03-8172-13 dome receptacles-clear
>
> - Small standoffs for the outlane plastics/slingshots. Four small ones
> are missing on mine (they go between the metal lane and the playfield,
> metal lane and the sling plastic, and sling plastic and the clear plastic
> above it).
- Here is a weird one. Those little white "circuit board" holders that
screw into the BOTTOM of the playfield. They hold the small circuit board
at the bottom right of the playfield to the playfield itself and the board
snaps into them. All four of mine were broken off so the board is just
dangling there.
Thanks for any help you guy scan give me!!
Chris
--
-------------------------------------------
Bucci's Pinball Arcade
"My collection & obsession online"
http://www.buccisarcade.com